Yep, i toggle jumper, it's named MFG. It's should be disable (writed to mainboard manual) until i start flash.
2012/10/2 Stefan Tauner <[email protected]> > On Tue, 2 Oct 2012 06:49:30 +0400 > Владислав Быков <[email protected]> wrote: > > > Yiiiha! 996F1P07 work! Thank you very-very-very much! :) > > Great, i hope it does also boot afterwards ;) > I have added your board to our list of supported boards and will commit > this later together with other small changes. > > just one additional question… > > > Found chipset "Intel H55". Enabling flash write... The Flash Descriptor > > Security Override Strap-Pin is set. Restrictions implied > > by the FRAP and FREG registers are NOT in effect. Please note that > Protected > > Range (PR) restrictions still apply. > > This "Flash Descriptor Security Override Strap" setting caught my > interest. This is configured by a physical pin of the chipset and > Intel's documentation very clearly recommends that there is no way to > enable it on shipped consumer boards (not to speak of making it the > default), it is just for debugging. My question is: did you notice a > jumper on the board that might influence this (maybe labelled "write > protection" or similar) or is there an option in the "BIOS" setup to > change this? > > -- > Kind regards/Mit freundlichen Grüßen, Stefan Tauner >
_______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
