2012/10/2 Владислав Быков <[email protected]>: > No problem :3 > Default jumper position (enabled): >> >> >> sudo flashrom -p internal -VV >> [sudo] password for vladislavbyk: >> flashrom v0.9.6.1-r1564 on Linux 3.5.4-1-ARCH (i686) >> flashrom is free software, get the source code at http://www.flashrom.org >> >> flashrom was built with libpci 3.1.10, GCC 4.7.1 20120721 (prerelease), >> little endian >> Command line (3 args): flashrom -p internal -VV >> Calibrating delay loop... OS timer resolution is 1 usecs, 1355M loops per >> second, 10 myus = 10 us, 100 myus = 97 us, 1000 myus = 1126 us, 10000 myus = >> 9925 us, 4 myus = 4 us, OK. >> >> Initializing internal programmer >> No coreboot table found. >> DMI string system-manufacturer: "To Be Filled By O.E.M." >> DMI string system-product-name: "To Be Filled By O.E.M." >> DMI string system-version: "To Be Filled By O.E.M." >> DMI string baseboard-manufacturer: "Foxconn" >> DMI string baseboard-product-name: "H55MX-S Series" >> DMI string baseboard-version: "1.1" >> DMI string chassis-type: "Desktop" >> Found ITE Super I/O, ID 0x8720 on port 0x2e >> Found chipset "Intel H55" with PCI ID 8086:3b06. Enabling flash write... >> 0xfff80000/0xffb80000 FWH IDSEL: 0x0 >> 0xfff00000/0xffb00000 FWH IDSEL: 0x0 >> 0xffe80000/0xffa80000 FWH IDSEL: 0x1 >> 0xffe00000/0xffa00000 FWH IDSEL: 0x1 >> 0xffd80000/0xff980000 FWH IDSEL: 0x2 >> 0xffd00000/0xff900000 FWH IDSEL: 0x2 >> 0xffc80000/0xff880000 FWH IDSEL: 0x3 >> 0xffc00000/0xff800000 FWH IDSEL: 0x3 >> 0xff700000/0xff300000 FWH IDSEL: 0x4 >> 0xff600000/0xff200000 FWH IDSEL: 0x5 >> 0xff500000/0xff100000 FWH IDSEL: 0x6 >> 0xff400000/0xff000000 FWH IDSEL: 0x7 >> 0xfff80000/0xffb80000 FWH decode enabled >> 0xfff00000/0xffb00000 FWH decode enabled >> 0xffe80000/0xffa80000 FWH decode disabled >> 0xffe00000/0xffa00000 FWH decode disabled >> 0xffd80000/0xff980000 FWH decode disabled >> 0xffd00000/0xff900000 FWH decode disabled >> 0xffc80000/0xff880000 FWH decode disabled >> 0xffc00000/0xff800000 FWH decode disabled >> 0xff700000/0xff300000 FWH decode disabled >> 0xff600000/0xff200000 FWH decode disabled >> 0xff500000/0xff100000 FWH decode disabled >> 0xff400000/0xff000000 FWH decode disabled >> Maximum FWH chip size: 0x100000 bytes >> BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8 >> Root Complex Register Block address = 0xfed1c000 >> GCS = 0xc64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 >> (SPI) >> Top Swap : not enabled >> SPIBAR = 0xfed1c000 + 0x3800 >> 0x04: 0x6008 (HSFS) >> HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=1, FDV=1, >> FLOCKDN=0 >> Programming OPCODES... >> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 >> done >> OP Type Pre-OP >> op[0]: 0x02, write w/ addr, none >> op[1]: 0x03, read w/ addr, none >> op[2]: 0xd8, write w/ addr, none >> op[3]: 0x05, read w/o addr, none >> op[4]: 0x90, read w/ addr, none >> op[5]: 0x01, write w/o addr, none >> op[6]: 0x9f, read w/o addr, none >> op[7]: 0xc7, write w/o addr, none >> Pre-OP 0: 0x06, Pre-OP 1: 0x50 >> >> 0x06: 0x0000 (HSFC) >> HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 >> 0x08: 0x00000000 (FADDR) >> 0x50: 0x00000a0b (FRAP) >> BMWAG 0x00, BMRAG 0x00, BRWA 0x0a, BRRA 0x0b >> 0x54: 0x00000000 FREG0: WARNING: Flash Descriptor region >> (0x00000000-0x00000fff) is read-only. >> >> 0x58: 0x07ff0700 FREG1: BIOS region (0x00700000-0x007fffff) is read-write. >> 0x5C: 0x06ff0001 FREG2: WARNING: Management Engine region >> (0x00001000-0x006fffff) is locked. >> 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. >> 0x64: 0x00001fff FREG4: Platform Data region is unused. >> 0x74: 0x00000000 (PR0 is unused) >> 0x78: 0x00000000 (PR1 is unused) >> 0x7C: 0x00000000 (PR2 is unused) >> 0x80: 0x00000000 (PR3 is unused) >> 0x84: 0x00000000 (PR4 is unused) >> Please send a verbose log to [email protected] if this board is not >> listed on >> http://flashrom.org/Supported_hardware#Supported_mainboards yet. >> Writes have been disabled. You can enforce write support with the >> ich_spi_force programmer option, but it will most likely harm your >> hardware! >> If you force flashrom you will get no support if something breaks. >> >> 0x90: 0x00 (SSFS) >> SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 >> 0x91: 0xf84200 (SSFC) >> SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0 >> 0x94: 0x5006 (PREOP) >> 0x96: 0x463b (OPTYPE) >> 0x98: 0x05d80302 (OPMENU) >> 0x9C: 0xc79f0190 (OPMENU+4) >> 0xA0: 0x00000000 (BBAR) >> 0xC4: 0x00000000 (LVSCC) >> LVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0, VCL=0 >> 0xC8: 0x00002001 (UVSCC) >> UVSCC: BES=0x1, WG=0, WSR=0, WEWS=0, EO=0x20, VCL=0 >> 0xD0: 0x00000000 (FPB) >> >> Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. >> === Content Section === >> FLVALSIG 0x0ff0a55a >> FLMAP0 0x02040102 >> FLMAP1 0x10100206 >> FLMAP2 0x00000020 >> >> --- Details --- >> NR (Number of Regions): 3 >> FRBA (Flash Region Base Address): 0x040 >> NC (Number of Components): 2 >> FCBA (Flash Component Base Address): 0x020 >> ISL (ICH/PCH Strap Length): 16 >> FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 >> NM (Number of Masters): 3 >> FMBA (Flash Master Base Address): 0x060 >> MSL/PSL (MCH/PROC Strap Length): 0 >> FMSBA (Flash MCH/PROC Strap Base Address): 0x200 >> >> === Component Section === >> FLCOMP 0x0930001b >> FLILL 0x00000000 >> >> --- Details --- >> Component 1 density: 4 MB >> Component 2 density: 4 MB >> Read Clock Frequency: 20 MHz >> Read ID and Status Clock Freq.: 33 MHz >> Write and Erase Clock Freq.: 33 MHz >> Fast Read is supported. >> Fast Read Clock Frequency: 33 MHz >> No forbidden opcodes. >> >> === Region Section === >> FLREG0 0x00000000 >> FLREG1 0x07ff0700 >> FLREG2 0x06ff0001 >> FLREG3 0x00001fff >> >> --- Details --- >> Region 0 (Descr.) 0x00000000 - 0x00000fff >> Region 1 (BIOS ) 0x00700000 - 0x007fffff >> Region 2 (ME ) 0x00001000 - 0x006fffff >> Region 3 (GbE ) is unused. >> >> === Master Section === >> FLMSTR1 0x0a0b0000 >> FLMSTR2 0x0c0d0000 >> FLMSTR3 0x08080118 >> >> --- Details --- >> Descr. BIOS ME GbE Platf. >> BIOS r rw rw >> ME r rw rw >> GbE rw >> >> Enabling hardware sequencing due to multiple flash chips detected. >> SPI Read Configuration: prefetching enabled, caching enabled, OK. >> No IT87* serial flash segment enabled. >> The following protocols are supported: FWH, Programmer-specific. >> Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI flash >> chips with a combined density of 8192 kB. >> There is only one partition containing the whole address space (0x000000 - >> 0x7fffff). >> There are 2048 erase blocks with 4096 B each. >> Found Programmer flash chip "Opaque flash chip" (8192 kB, >> Programmer-specific) at physical address 0x0. >> Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> >> Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x14, id2 0x8c, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> >> Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x41, id2 >> 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x02, id2 >> 0x00, id1 is normal flash content, id2 is normal flash content >> Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> >> Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4e, id2 >> 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than >> supported size 1024 kB of chipset/board/programmer for FWH interface, >> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> >> Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than >> supported size 1024 kB of chipset/board/programmer for FWH interface, >> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> >> Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> >> Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x41, id2 >> 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4e, id2 >> 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 >> 0x14, id2 0x8c, id1 parity violation, id1 is normal flash content, id2 is >> normal flash content >> >> Found Programmer flash chip "Opaque flash chip" (8192 kB, >> Programmer-specific). >> No operations were specified. >> Restoring MMIO space at 0xb77908a0 >> Restoring MMIO space at 0xb779089c >> Restoring MMIO space at 0xb7790898 >> Restoring MMIO space at 0xb7790896 >> Restoring MMIO space at 0xb7790894 >> >> Restoring PCI config space for 00:1f:0 reg 0xdc >> >> > > > Disabled: >> >> ^[[A% >> >> sudo flashrom -p internal -VV >> [sudo] password for vladislavbyk: >> flashrom v0.9.6.1-r1564 on Linux 3.5.4-1-ARCH (i686) >> flashrom is free software, get the source code at http://www.flashrom.org >> >> flashrom was built with libpci 3.1.10, GCC 4.7.1 20120721 (prerelease), >> little endian >> Command line (3 args): flashrom -p internal -VV >> Calibrating delay loop... OS timer resolution is 1 usecs, 1328M loops per >> second, 10 myus = 9 us, 100 myus = 96 us, 1000 myus = 1083 us, 10000 myus = >> 9907 us, 4 myus = 3 us, OK. >> >> Initializing internal programmer >> No coreboot table found. >> DMI string system-manufacturer: "To Be Filled By O.E.M." >> DMI string system-product-name: "To Be Filled By O.E.M." >> DMI string system-version: "To Be Filled By O.E.M." >> DMI string baseboard-manufacturer: "Foxconn" >> DMI string baseboard-product-name: "H55MX-S Series" >> DMI string baseboard-version: "1.1" >> DMI string chassis-type: "Desktop" >> Found ITE Super I/O, ID 0x8720 on port 0x2e >> Found chipset "Intel H55" with PCI ID 8086:3b06. Enabling flash write... >> 0xfff80000/0xffb80000 FWH IDSEL: 0x0 >> 0xfff00000/0xffb00000 FWH IDSEL: 0x0 >> 0xffe80000/0xffa80000 FWH IDSEL: 0x1 >> 0xffe00000/0xffa00000 FWH IDSEL: 0x1 >> 0xffd80000/0xff980000 FWH IDSEL: 0x2 >> 0xffd00000/0xff900000 FWH IDSEL: 0x2 >> 0xffc80000/0xff880000 FWH IDSEL: 0x3 >> 0xffc00000/0xff800000 FWH IDSEL: 0x3 >> 0xff700000/0xff300000 FWH IDSEL: 0x4 >> 0xff600000/0xff200000 FWH IDSEL: 0x5 >> 0xff500000/0xff100000 FWH IDSEL: 0x6 >> 0xff400000/0xff000000 FWH IDSEL: 0x7 >> 0xfff80000/0xffb80000 FWH decode enabled >> 0xfff00000/0xffb00000 FWH decode enabled >> 0xffe80000/0xffa80000 FWH decode disabled >> 0xffe00000/0xffa00000 FWH decode disabled >> 0xffd80000/0xff980000 FWH decode disabled >> 0xffd00000/0xff900000 FWH decode disabled >> 0xffc80000/0xff880000 FWH decode disabled >> 0xffc00000/0xff800000 FWH decode disabled >> 0xff700000/0xff300000 FWH decode disabled >> 0xff600000/0xff200000 FWH decode disabled >> 0xff500000/0xff100000 FWH decode disabled >> 0xff400000/0xff000000 FWH decode disabled >> Maximum FWH chip size: 0x100000 bytes >> BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x8 >> Root Complex Register Block address = 0xfed1c000 >> GCS = 0xc64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 >> (SPI) >> Top Swap : not enabled >> SPIBAR = 0xfed1c000 + 0x3800 >> 0x04: 0x4008 (HSFS) >> HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=0, FDV=1, >> FLOCKDN=0 >> The Flash Descriptor Security Override Strap-Pin is set. Restrictions >> implied >> by the FRAP and FREG registers are NOT in effect. Please note that >> Protected >> Range (PR) restrictions still apply. >> Programming OPCODES... >> program_opcodes: preop=5006 optype=463b opmenu=05d80302c79f0190 >> done >> OP Type Pre-OP >> op[0]: 0x02, write w/ addr, none >> op[1]: 0x03, read w/ addr, none >> op[2]: 0xd8, write w/ addr, none >> op[3]: 0x05, read w/o addr, none >> op[4]: 0x90, read w/ addr, none >> op[5]: 0x01, write w/o addr, none >> op[6]: 0x9f, read w/o addr, none >> op[7]: 0xc7, write w/o addr, none >> Pre-OP 0: 0x06, Pre-OP 1: 0x50 >> >> 0x06: 0x0000 (HSFC) >> HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 >> 0x08: 0x00000000 (FADDR) >> 0x50: 0x0000ffff (FRAP) >> BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff >> 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is >> read-write. >> 0x58: 0x07ff0700 FREG1: BIOS region (0x00700000-0x007fffff) is read-write. >> 0x5C: 0x06ff0001 FREG2: Management Engine region (0x00001000-0x006fffff) >> is read-write. >> 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. >> 0x64: 0x00001fff FREG4: Platform Data region is unused. >> 0x74: 0x00000000 (PR0 is unused) >> 0x78: 0x00000000 (PR1 is unused) >> 0x7C: 0x00000000 (PR2 is unused) >> 0x80: 0x00000000 (PR3 is unused) >> 0x84: 0x00000000 (PR4 is unused) >> >> 0x90: 0x00 (SSFS) >> SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 >> 0x91: 0xf84200 (SSFC) >> SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=2, SME=0, SCF=0 >> 0x94: 0x5006 (PREOP) >> 0x96: 0x463b (OPTYPE) >> 0x98: 0x05d80302 (OPMENU) >> 0x9C: 0xc79f0190 (OPMENU+4) >> 0xA0: 0x00000000 (BBAR) >> 0xC4: 0x00000000 (LVSCC) >> LVSCC: BES=0x0, WG=0, WSR=0, WEWS=0, EO=0x0, VCL=0 >> 0xC8: 0x00002001 (UVSCC) >> UVSCC: BES=0x1, WG=0, WSR=0, WEWS=0, EO=0x20, VCL=0 >> 0xD0: 0x00000000 (FPB) >> >> Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. >> === Content Section === >> FLVALSIG 0x0ff0a55a >> FLMAP0 0x02040102 >> FLMAP1 0x10100206 >> FLMAP2 0x00000020 >> >> --- Details --- >> NR (Number of Regions): 3 >> FRBA (Flash Region Base Address): 0x040 >> NC (Number of Components): 2 >> FCBA (Flash Component Base Address): 0x020 >> ISL (ICH/PCH Strap Length): 16 >> FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 >> NM (Number of Masters): 3 >> FMBA (Flash Master Base Address): 0x060 >> MSL/PSL (MCH/PROC Strap Length): 0 >> FMSBA (Flash MCH/PROC Strap Base Address): 0x200 >> >> === Component Section === >> FLCOMP 0x0930001b >> FLILL 0x00000000 >> >> --- Details --- >> Component 1 density: 4 MB >> Component 2 density: 4 MB >> Read Clock Frequency: 20 MHz >> Read ID and Status Clock Freq.: 33 MHz >> Write and Erase Clock Freq.: 33 MHz >> Fast Read is supported. >> Fast Read Clock Frequency: 33 MHz >> No forbidden opcodes. >> >> === Region Section === >> FLREG0 0x00000000 >> FLREG1 0x07ff0700 >> FLREG2 0x06ff0001 >> FLREG3 0x00001fff >> >> --- Details --- >> Region 0 (Descr.) 0x00000000 - 0x00000fff >> Region 1 (BIOS ) 0x00700000 - 0x007fffff >> Region 2 (ME ) 0x00001000 - 0x006fffff >> Region 3 (GbE ) is unused. >> >> === Master Section === >> FLMSTR1 0x0a0b0000 >> FLMSTR2 0x0c0d0000 >> FLMSTR3 0x08080118 >> >> --- Details --- >> Descr. BIOS ME GbE Platf. >> BIOS r rw rw >> ME r rw rw >> GbE rw >> >> Enabling hardware sequencing due to multiple flash chips detected. >> SPI Read Configuration: prefetching enabled, caching enabled, OK. >> No IT87* serial flash segment enabled. >> The following protocols are supported: FWH, Programmer-specific. >> Probing for Programmer Opaque flash chip, 0 kB: Found 2 attached SPI flash >> chips with a combined density of 8192 kB. >> There is only one partition containing the whole address space (0x000000 - >> 0x7fffff). >> There are 2048 erase blocks with 4096 B each. >> Found Programmer flash chip "Opaque flash chip" (8192 kB, >> Programmer-specific) at physical address 0x0. >> Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> >> Probing for Intel 82802AC, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0x41, id2 0x4d, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0x14, id2 0x8c, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> >> Probing for Sharp LHF00L04, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0x41, id2 >> 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0x02, id2 >> 0x00, id1 is normal flash content, id2 is normal flash content >> Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> >> Probing for SST SST49LF008A, 1024 kB: probe_jedec_common: id1 0x4e, id2 >> 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF008C, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, >> id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than >> supported size 1024 kB of chipset/board/programmer for FWH interface, >> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> >> Probing for ST M50FLW080A, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FLW080B, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x41, id2 0x4d, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than >> supported size 1024 kB of chipset/board/programmer for FWH interface, >> probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0x14, id2 0x8c, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> >> Probing for ST M50FW080, 1024 kB: probe_82802ab: id1 0x4e, id2 0x56, id1 >> parity violation, id1 is normal flash content, id2 is normal flash content >> Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0x14, id2 >> 0x8c, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> >> Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0x41, id2 >> 0x4d, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V080FA, 1024 kB: probe_jedec_common: id1 0x4e, id2 >> 0x56, id1 parity violation, id1 is normal flash content, id2 is normal flash >> content >> Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 >> 0x14, id2 0x8c, id1 parity violation, id1 is normal flash content, id2 is >> normal flash content >> >> Found Programmer flash chip "Opaque flash chip" (8192 kB, >> Programmer-specific). >> No operations were specified. >> Restoring MMIO space at 0xb77438a0 >> Restoring MMIO space at 0xb774389c >> Restoring MMIO space at 0xb7743898 >> Restoring MMIO space at 0xb7743896 >> Restoring MMIO space at 0xb7743894 >> >> Restoring PCI config space for 00:1f:0 reg 0xdc > > > Btw, maybe you have jabber or icq? :) It would be convenient)
No, but you are welcome to join #flashrom on irc.freenode.net http://flashrom.org/IRC > 2012/10/2 Stefan Tauner <[email protected]> >> >> On Tue, 2 Oct 2012 17:41:21 +0400 >> Владислав Быков <[email protected]> wrote: >> >> > Yep, i toggle jumper, it's named MFG. It's should be disable (writed to >> > mainboard manual) until i start flash. >> >> Ok, thanks, can you please run "flashrom -p internal -VV" with the >> jumper in the previous/untoggled/default position and send us the >> output? I would like to know if/how the contents of the registers >> change by this exactly. This is not clearly documented publicly by >> Intel but might be helpful to us in the future. >> >> -- >> Kind regards/Mit freundlichen Grüßen, Stefan Tauner > > > > _______________________________________________ > flashrom mailing list > [email protected] > http://www.flashrom.org/mailman/listinfo/flashrom _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
