On Wed, 03 Jul 2013 19:31:16 +0200 Reiner Luett <[email protected]> wrote:
> On 03.07.2013 11:43, Stefan Tauner wrote: > > On Wed, 03 Jul 2013 00:29:03 +0200 > > Reiner Luett <[email protected]> wrote: > > > >> I can use it with spispeed 33. > > > > JFYI, you did use 16.5MHz actually because my patch was incomplete and > > always sets 16.5MHz although saying otherwise. > > I couldn't see this while flashing the chip. I only have this > information in the log file: > > Setting SPI clock to 33 MHz (0x1) and disabling fast reads... done > (0x0cc08303) fastReadEnable=0, SpiArbEnable=0, SpiAccessMacRomEn=1, > SpiHostAccessRomEn=1, ArbWaitCount=4, SpiBridgeDisable=1, DropOneClkOnRd=0 > NormSpeed is 16.5 MHz > > But it seem to write perfectly now. The output printed after NormSpeed was and is correct, as was all the outer text output, but under the hood it did always set 16.5MHz instead of what the user requested. > > > I have prepared a corrected patch, but it is rebased on another > > AMD-related patch (i.e. IMC shutdown) and hence is not applicable as is > > so I do not post it here. If anyone wants to give it a shot, please say > > so. > > Yes for sure, I like to try. But where could I see the correct write speed? You would need to checkout my github repository. The two patches you need are inside the flashrom_next branch: https://github.com/stefanct/flashrom/tree/flashrom_next > BTW: Do you have the IMC firmware for the Asrock E350M1 or maybe know, > who I need to contact at AMD to obtain it? No idea. If it is not included with the default build of coreboot it is probably not mandatory. I remember that there was some work done regarding writing an open source firmware for it. You better ask [email protected] or on IRC. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
