okay, no rush, ipxe builds fine (used it a ton, have a good iscsi net). I'm
converting to 2 separate networks, so I'm skipping the pxe with chaining
configs, I have a few intel 1000 gt cards, with the intel util it won't use
.rom files, so I used flashrom, no issues there, the issue is on boot, my
normal script sets the ip/netmask/gateway and does sanboot
iscsi:blah::::target:diskname. but with the flashed rom (with embedded script)
the first time flashing, I got a blue rectangle on the bottom left, with a
smaller white rectangle to the right of it, and it didn't load the disk, my 2nd
try, I get nothing after it shows ipxe and the version and clears the screen,
so I used the control B method, using the same script typed out, it won't
connect, until I filled out the initiator-iqn and I also had to issues ifopen
then I get that it attached to 0x80, and booting 0x80, but it doesn't go any
farther and actually bootany pointers on what might be wrong? I did pad the
.rom using dd, verified the size, if the pci ID helps its 8086107cI believe the
romchip was a w25x10, 128Kb, I used the nicintel_sbi programmernot sure how
much more clear I can be on my own, so if you have any questions I'll idle away
:)
Thanks for your time and for making flashrom, it's a great utility that I'm
going to be using alot over the next few weeks
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
