2014-04-02 5:07 GMT+02:00 Tsukasa Mcp_Reznor <[email protected]>: > okay, no rush, ipxe builds fine (used it a ton, have a good iscsi net). I'm > converting to 2 separate networks, so I'm skipping the pxe with chaining > configs, I have a few intel 1000 gt cards, with the intel util it won't use > .rom files, so I used flashrom, no issues there, the issue is on boot, my > normal script sets the ip/netmask/gateway and does sanboot > iscsi:blah::::target:diskname. but with the flashed rom (with embedded > script) the first time flashing, I got a blue rectangle on the bottom left, > with a smaller white rectangle to the right of it, and it didn't load the > disk, my 2nd try, I get nothing after it shows ipxe and the version and > clears the screen, so I used the control B method, using the same script > typed out, it won't connect, until I filled out the initiator-iqn and I also > had to issues ifopen > > then I get that it attached to 0x80, and booting 0x80, but it doesn't go any > farther and actually boot > any pointers on what might be wrong? I did pad the .rom using dd, verified > the size, if the pci ID helps its 8086107c > I believe the romchip was a w25x10, 128Kb, I used the nicintel_sbi > programmer > not sure how much more clear I can be on my own, so if you have any > questions I'll idle away :) > > Thanks for your time and for making flashrom, it's a great utility that I'm > going to be using alot over the next few weeks
>From all that information I would expect this to be an ipxe issue. ipxe seems to have some ways of showing what is going on (or not) while booting: http://ipxe.org/buildcfg/log_level http://ipxe.org/buildcfg/console_serial http://ipxe.org/buildcfg/console_syslog And you can reach the developers through ways listed here: http://ipxe.org/contact HTH, Idwer _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
