On 09.01.16 17:12, Stefan Tauner wrote:
On Thu, 7 Jan 2016 02:56:52 +0100
Manuel Dejonghe <[email protected]> wrote:
Hi all,
I just wanted to report success (as the tool requests) for reading and
writing to a winbond W25X64VFIG during installation of libreboot on my
lenovo thinkpad x200.
The programmer I used was a RasPi 2 linux_spi wired directly with
soldered wires.
Hello Manuel,
thanks for your report!
I have marked the flash chip as fully tested and will commit that later
together with other small changes. However, your write log does
actually not proof anything because the data in the chip was already
equal to the image file as can be seen by the message at the end.
Please consider that for any further logs you send, thanks.
Hi there,
thank you for the feedback.
Of course, I should have thought about that, that was stupid of me,
sorry. Next time that I'll open the device (for reflashing), I'll redo
the log so that you will have proper proof.
The way this happened this time was "okay, let's first see if it works,
then I'll redo the operation with a logfile so that I can send them
something.
thank you,
Manuel
_______________________________________________
flashrom mailing list
[email protected]
http://www.flashrom.org/mailman/listinfo/flashrom
