On Mon, 11 Jan 2016 10:30:20 +0100 Manuel Dejonghe <[email protected]> wrote:
> On 09.01.16 17:12, Stefan Tauner wrote: > > On Thu, 7 Jan 2016 02:56:52 +0100 > > Manuel Dejonghe <[email protected]> wrote: > > > >> Hi all, > >> I just wanted to report success (as the tool requests) for reading and > >> writing to a winbond W25X64VFIG during installation of libreboot on my > >> lenovo thinkpad x200. > >> > >> The programmer I used was a RasPi 2 linux_spi wired directly with > >> soldered wires. > > > > Hello Manuel, > > > > thanks for your report! > > I have marked the flash chip as fully tested and will commit that later > > together with other small changes. However, your write log does > > actually not proof anything because the data in the chip was already > > equal to the image file as can be seen by the message at the end. > > Please consider that for any further logs you send, thanks. > > > > > Hi there, > thank you for the feedback. > Of course, I should have thought about that, that was stupid of me, > sorry. Next time that I'll open the device (for reflashing), I'll redo > the log so that you will have proper proof. > The way this happened this time was "okay, let's first see if it works, > then I'll redo the operation with a logfile so that I can send them > something. That's probably the reason for 99% of these reports (you are not alone ;) No need to resend though. The chip was expected to just work. -- Kind regards/Mit freundlichen Grüßen, Stefan Tauner _______________________________________________ flashrom mailing list [email protected] http://www.flashrom.org/mailman/listinfo/flashrom
