On Thu, 2021-11-25 at 17:02 +0300, Сергей Янович wrote: > On Wed, 2021-11-24 at 13:17 +0300, Mike Banon wrote: > > > P.S. I hope that your 1.8V chip wasn't partially damaged by a > > temporary usage of 3.3V on it > > It is possible, but seems unlikely. The chip correctly responds to > flasrom probing queries. I suspect I activated a write protection of > some kind. /WP is high at 1.81V now. So I am investigation software WP > in the chip now.
SOLVED. For reference. I guessed correctly. Both CMP and WPS bits got set in the status register. The chip was successfully flashed after both bits were cleared. I used a small C program for reading and writing. The program was made along examples in [1]. 1. https://www.emcraft.com/stm32f769i-discovery-board/accessing-spi-devices-in-linux _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
