Hi Sergey, > Both CMP and WPS bits got set in the status register. The chip was > successfully flashed after both bits were cleared.
I'm curious: Please tell, how you clear these CMP and WPS bits? What command do you run to do this? чт, 25 нояб. 2021 г. в 23:44, Сергей Янович <sergei.ianov...@yandex.ru>: > > On Thu, 2021-11-25 at 17:02 +0300, Сергей Янович wrote: > > On Wed, 2021-11-24 at 13:17 +0300, Mike Banon wrote: > > > > > P.S. I hope that your 1.8V chip wasn't partially damaged by a > > > temporary usage of 3.3V on it > > > > It is possible, but seems unlikely. The chip correctly responds to > > flasrom probing queries. I suspect I activated a write protection of > > some kind. /WP is high at 1.81V now. So I am investigation software WP > > in the chip now. > > SOLVED. For reference. > > I guessed correctly. Both CMP and WPS bits got set in the status > register. The chip was successfully flashed after both bits were > cleared. I used a small C program for reading and writing. The program > was made along examples in [1]. > > 1. > https://www.emcraft.com/stm32f769i-discovery-board/accessing-spi-devices-in-linux > > _______________________________________________ > flashrom mailing list -- flashrom@flashrom.org > To unsubscribe send an email to flashrom-le...@flashrom.org _______________________________________________ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
