On Wed, Aug 26, 2009 at 8:01 AM, Erik Jakobsen<eja at urbakken.dk> wrote: > Thank you Brian for your work. I'll run with this set up. > Today I have been running with PSDR 1.18.2, and have had now pulsing at all
I suspect you somehow got an SVN revision of PowerSDR that had that old problem in it. Be sure to verify that you are getting the latest version of the binary from the test branch. I am currently running revision 3339. OTOH, if you are relatively new to Flex and PowerSDR, you should make everything work with the release version, i.e. 1.18.2, first. After you do that and make sure everything is working you can switch to trying the alpha versions. That way you can be sure that any problems you encounter are a function of the alpha code and not your initial set-up. Nothing is more frustrating than trying to debug two or three things at once. Do remember to recalibrate the receiver image rejection whenever switching from the production to the test branch software and vice-versa. One of the new features being tested in the test branch is an on-the-fly continuous image-rejection calibration that uses strong in-band signals instead of the built-in test oscillator. Good luck and happy digiting! -- 73 de Brian, WB6RQN/J79BPL
