Brian Lloyd wrote: > On Wed, Aug 26, 2009 at 8:01 AM, Erik Jakobsen<eja at urbakken.dk> wrote: > >> Thank you Brian for your work. I'll run with this set up. >> Today I have been running with PSDR 1.18.2, and have had now pulsing at all >> > > I suspect you somehow got an SVN revision of PowerSDR that had that > old problem in it. Be sure to verify that you are getting the latest > version of the binary from the test branch. I am currently running > revision 3339. > > OTOH, if you are relatively new to Flex and PowerSDR, you should make > everything work with the release version, i.e. 1.18.2, first. After > you do that and make sure everything is working you can switch to > trying the alpha versions. That way you can be sure that any problems > you encounter are a function of the alpha code and not your initial > set-up. Nothing is more frustrating than trying to debug two or three > things at once. > > Do remember to recalibrate the receiver image rejection whenever > switching from the production to the test branch software and > vice-versa. One of the new features being tested in the test branch is > an on-the-fly continuous image-rejection calibration that uses strong > in-band signals instead of the built-in test oscillator. > > Good luck and happy digiting! > > I think you are right Brian. I cannot remember the SVN version I ran at the moment the issue occured.
I am relative new to Flex, and yes, then it's better to run the offical version and get experienced with this. You are right about it's very frustrating managing 2 or 3 issues at a time :-) I'm aware of the recalibration the receiver image rejection. Is nice, when the on-the-fly option is active. Thanks for the good wishes, and your help. I'll let you know how things are running here, when I have played a while with it. 73s-Erik-OZ4KK
