Hallo David, This version compiles for openSUSE 11.1 but does not work on my 11.1 x86_64 system. Starting the program from a xterm reports a segmentation fault. Unfortunately I have to wait until Friday or Saturday to test it on a i586 system. Maybe this makes a difference.
Since about one week I am also testing on openSUSE 11.2RC1. For this version I have to use the attached util_cxx.diff to solve the first compile problem. But a few step later the next error stopped compilation. I attached also the build log. Fldigi and Flarq compile without any warning or error on openSUSE 11.2. For Wrap I had to use a patch similar to the one I tried for Flrig. This patch is only for 11.2, the older versions compile only unpatched. The latest releases will be available for openSUSE 11.2 at http://download.opensuse.org/repositories/hamradio/ in a few hours. The test versions are available at http://download.opensuse.org/repositories/home:/dl8fcl/ 73, Walter DL8FCL w1hkj schrieb: > Flrig is a separate rig control program that can be also run as an > adjunct to fldigi on Linux and Windows platforms (no OS X yet). It > currently supports the following transceivers > > 1. FT100D 11. IC756PRO-II 21. TT516 > 2. FT450 12. IC756PRO-II 22. TT538 > 3. FT817 13. IC7000 23. TT550 > 4. FT857D 14. IC7200 24. TT563 > 5. FT2000 15. IC7700 > 6. IC706MKIIG 16. IC910H > 7. IC728 17. K2 > 8. IC735 18. K3 > 9. IC746 19. TS140 > 10. IC746PRO 20. TS2000 > > The program configures its primary dialog in accordance with the > capability of the transceiver. The user only sees and can operate the > controls that are relevant to the transceiver being controlled. > Controls not available are either hidden or grayed out. > > > > Older Icom Model > > > Modern Icom HF/VHF all mode > > > Low cost Yaesu HF all mode > > > TenTec - Pegasus - Computer Only Transceiver > > > If you use the program with fldigi, then fldigi needs to start first > and finish last as it acts as a socket server to the flrig program. > When used together flrig sends vital data to fldigi respecting the > transceiver characteristic, TRANSCEIVER MODES / TRANSCEIVER > BANDWIDTHS. For some transceivers the bandwidth selection is mode > dependent. flrig manages that relationship. You tell fldigi to work > with flrig by selecting the rig control called "xmlrpc" from the rig > control configuration tabs. > > Most, but not all of the supported transceivers have been tested. > Remember that you will be testing alpha code if you choose to try this > program. > > The s/n and power out meters will be active if and only if your > transceiver supports sending that data. > > * http://www.w1hkj.com/alpha/flrig-0.9.951.zip - windows executable > * http://www.w1hkj.com/alpha/flrig-0.9.951.tgz - linux binary > * http://www.w1hkj.com/alpha/flrig-0.9.951.src.tgz - source code > * http://www.w1hkj.com/alpha/rig.png - image suitable for linux > desktop launcher > > 73, Dave, W1HKJ > > ------------------------------------------------------------------------ > > This body part will be downloaded on demand. -------------- next part -------------- A non-text attachment was scrubbed... Name: util_cxx.diff Type: text/x-patch Size: 425 bytes Desc: not available Url : https://lists.berlios.de/pipermail/fldigi-alpha/attachments/20091028/534e91fd/attachment.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: wrap.cxx.diff Type: text/x-patch Size: 281 bytes Desc: not available Url : https://lists.berlios.de/pipermail/fldigi-alpha/attachments/20091028/534e91fd/attachment-0001.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: build.log Type: text/x-log Size: 19335 bytes Desc: not available Url : https://lists.berlios.de/pipermail/fldigi-alpha/attachments/20091028/534e91fd/attachment-0002.bin
