3.13BP is working great here so far. And I see the ability to select/de-select the RSID for the various modes and the ability to select "opmode" modes view.
These changes are fantastic and will be a great help for our emcomm ops here in WPA. We're going to be encouraging folks (our team members and EMA/EOC stations) to monitor our call frequency on 80m. RSID select will allow them to park on a fixed freq, and set RSID to only detect Olivia or MT63 (our primary wrap modes). We use Olivia 8/500 for short wrap messages and MT63 for detailed reports, spread sheets and blocks of formal messages as separate wraps in a single transmission. An EOC, for instance, would only have to turn on the HF rig to our freq in a memory channel, turn on the computer with all the settings already configured, and all they would need to know is how to check the WRAP folder as any formal, priority or emergency traffic which we would always send as wrap. This acts as a kind of filter so they wouldn't have to sift through chat and diddle to see the important traffic. BTW, I am not advocating sending messages to specific unmanned/unlicensed stations which would be a violation of the regulations. However, there is nothing saying that an unlicensed station is prohibited from monitoring traffic that we send between our licensed stations. The ultimate goal is to show the value in digi emcomm and put some of the gear to use at EOCs and EMAs which would give us a better chance of being invited in to run the stations during drills and actual emergencies. Thanks again to the team for all the great work! We're putting it to good use here in WPA! -Dave, KB3FXI w1hkj wrote: > See: http://www.w1hkj.com/alpha/fldigi-flarq/ > > Attached file shows all of the changes that have occurred from 3.12.5 to > 3.13BP. > > Version 3.13BP > Initial UI > Restored full UI for a first time use of fldigi. The minimal > UI gives the impression of a handicapped application. > The initial application settings which include the visual > appearance rightfully belongs in a startup wizard. > > NOLOG alternate Callsign entry > * Corrected logic for display of alternate callsign entry > on the status bar when logbook / rig control is not visible. > * Removed extraneous menu divider > > Adjust View menu > * Rename minimal control menu items > * Move to submenus > * Move waterfall control config to Configure menu > * Use radio buttons > * Simplify callbacks > > Xchg In capture > Suppressed leading space filler on captured text when > field is empty. Subsequent appended text includes space > separator. > > WF freq limit > Imposed consistency in computations related to waterfall > lower/upper frequency bounds. > > > 73, Dave, W1HKJ > for the development team > > > > ------------------------------------------------------------------------ > > _______________________________________________ > fldigi-alpha mailing list > [email protected] > https://lists.berlios.de/mailman/listinfo/fldigi-alpha _______________________________________________ fldigi-alpha mailing list [email protected] https://lists.berlios.de/mailman/listinfo/fldigi-alpha
