My colleagues have had no problems with Artifactory. Maybe it was just tired
after all the uploads I've been doing... I just did a mojo-install again
(using both 2.0.1 and version unspecified). These were successful except for
the bundle error you said I could ignore. So my theory of a bug in the 2.0.1
installer doesn't seem to hold.
I wanted to share the active profile in my Maven config, in case it is
relevant. I believe I originally added this in order to be able to run the
install mojo, but I don't know if it makes sense.
<profile>
<id>flex-mojos</id>
<repositories>
<repository>
<id>flex-mojos-repository</id>
<url>http://svn.sonatype.org/flexmojos/repository/</url>
<snapshots> <enabled>true</enabled> </snapshots>
<releases> <enabled>true</enabled> </releases>
</repository>
</repositories>
<pluginRepositories>
<pluginRepository>
<id>local</id>
<url>http://svn.sonatype.org/flexmojos/repository/</url>
<snapshots> <enabled>true</enabled> </snapshots>
<releases> <enabled>true</enabled> </releases>
</pluginRepository>
</pluginRepositories>
</profile>
On Wed, Jan 21, 2009 at 3:34 PM, Marvin Froeder <[email protected]> wrote:
> No, that is expected!
>
> airframework, is what adobe provides. air-framework is a pom created by
> flex-mojos. So is easier to add dependencies for an air project.
>
> The same happen with framework and flex-framework....
>
> About adt and afe, that is expected when you install FB3 SDK into maven
> repo. So far so good.
>
> The only thing I can think that is causing the problem is Artifactory.
> This return 500 can be a clue of what is going on. Somehow something get
> corrupted there. Is the only viable explanation. This works for many
> people, can't be flex-mojos fault!
>
> Can you delete you repo (just com/adobe/*) and bypass artifactory?
>
> I know that is frustrating, for me too, specialy because doesn't look to
> have a direct connection with flex-mojos...
>
> But I will not give up! It work here and will work there too.
>
> I add you to gtalk, authorize me when you can.
>
>
> VELO
>
>
> On Wed, Jan 21, 2009 at 8:47 PM, Richard Rodseth <[email protected]>wrote:
>
>> Velo,
>>
>> I can certainly build a simple library that doesn't use datavisualization
>> or third party libraries, using a pom that looks like your simple library
>> example (ie no build, repository or dependencies section), and no
>> Artifactory.
>>
>> I did notice an interesting thing. I started getting 500 errors while
>> deploying to Artifactory. They all seemed to be air-related, eg.:
>>
>> [ERROR] Unable to install artifact: /tmp/air-framework59602.pom
>> org.apache.maven.artifact.deployer.ArtifactDeploymentException: Error
>> deploying artifact: Failed to transfer file:
>> http://builds.companyname.net/artifactory/libs-releases?/com/adobe/flex/framework/air-framework/3.2.0-fb3/air-framework-3.2.0-fb3.pom<https://owa.centerbeam.com/exchweb/bin/redir.asp?URL=http://builds.verdiem.net/artifactory/libs-releases?/com/adobe/flex/framework/air-framework/3.2.0-fb3/air-framework-3.2.0-fb3.pom>.
>> Return code is: 500
>>
>> So I decided to try installing the SDK to the local repository with
>> version 3.2.0-fb3.
>> When I look at the local repository, the compiler/adt and compiler/afe
>> folders have a 3.2.0-fb3 subfolder, but not a 3.2.0.3958 one.
>> Also, the framework folder has both "airframework" and "air-framework". So
>> perhaps the install-mojo has issues when used with a 3.2 source directory.
>>
>>
>> On Wed, Jan 21, 2009 at 1:41 PM, Richard Rodseth <[email protected]>wrote:
>>
>>> Fuller output below. Does the "path to dependency" reveal something?
>>> I don't see how anything could be corrupted. I've cleared the local (m2)
>>> repository and the SDK uploaded to Artifactory was a fresh download from
>>> here:
>>> http://www.adobe.com/products/flex/flexdownloads/index.html
>>> I did point Flexbuilder at that location (i.e. added it as an Installed
>>> SDK), so I will now try making a separate SDK just for Maven and upload that
>>> to Artifactory.
>>>
>>> [INFO] Scanning for projects...
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [INFO] Building MVCSLib
>>> [INFO] task-segment: [clean, install]
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [INFO] [clean:clean]
>>> [INFO] [resources:resources]
>>> [INFO] Using default encoding to copy filtered resources.
>>> Downloading:
>>> http://svn.sonatype.org/flexmojos/repository//com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.pom
>>> Downloading:
>>> http://svn.sonatype.org/flexmojos/repository//com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.pom
>>> Downloading:
>>> http://repo1.maven.org/maven2/com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.pom
>>> Downloading:
>>> http://svn.sonatype.org/flexmojos/repository//com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.pom
>>> Downloading:
>>> http://builds.verdiem.net/artifactory/repo/com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.pom
>>> Downloading:
>>> http://svn.sonatype.org/flexmojos/repository//com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.jar
>>> Downloading:
>>> http://svn.sonatype.org/flexmojos/repository//com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.jar
>>> Downloading:
>>> http://svn.sonatype.org/flexmojos/repository//com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.jar
>>> Downloading:
>>> http://builds.verdiem.net/artifactory/repo/com/adobe/flex/compiler/adt/3.2.0.3958/adt-3.2.0.3958.jar
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [ERROR] BUILD ERROR
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [INFO] Failed to resolve artifact.
>>>
>>> Missing:
>>> ----------
>>> 1) com.adobe.flex.compiler:adt:jar:3.2.0.3958
>>>
>>> Try downloading the file manually from the project website.
>>>
>>> Then, install it using the command:
>>> mvn install:install-file -DgroupId=com.adobe.flex.compiler
>>> -DartifactId=adt -Dversion=3.2.0.3958 -Dpackaging=jar -Dfile=/path/to/file
>>>
>>> Alternatively, if you host your own repository you can deploy the file
>>> there:
>>> mvn deploy:deploy-file -DgroupId=com.adobe.flex.compiler
>>> -DartifactId=adt -Dversion=3.2.0.3958 -Dpackaging=jar -Dfile=/path/to/file
>>> -Durl=[url] -DrepositoryId=[id]
>>>
>>> Path to dependency:
>>> 1) info.flex-mojos:flex-compiler-mojo:maven-plugin:2.0.1
>>> 2) com.adobe.flex:compiler:pom:3.2.0-fb3
>>> 3) com.adobe.flex.compiler:adt:jar:3.2.0.3958
>>>
>>> ----------
>>> 1 required artifact is missing.
>>>
>>> for artifact:
>>> info.flex-mojos:flex-compiler-mojo:maven-plugin:2.0.1
>>>
>>> from the specified remote repositories:
>>> central (http://builds.verdiem.net/artifactory/repo),
>>> local (http://svn.sonatype.org/flexmojos/repository/),
>>> snapshots (http://builds.verdiem.net/artifactory/repo),
>>> flex-mojos-repository (http://svn.sonatype.org/flexmojos/repository/)
>>>
>>>
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [INFO] For more information, run Maven with the -e switch
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [INFO] Total time: 6 seconds
>>> [INFO] Finished at: Wed Jan 21 13:23:56 PST 2009
>>> [INFO] Final Memory: 11M/20M
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> no-vpro03-qa:MVCSLib rrodseth$
>>>
>>>
>>
>>
>>
>
> >
>
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google
Groups "Flex Mojos" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/flex-mojos?hl=en?hl=en
http://blog.flex-mojos.info/
-~----------~----~----~----~------~----~------~--~---
