On Wed, 11 Feb 2004 16:55:54 -0500
"Toby Deitrich" <[EMAIL PROTECTED]> wrote:
> Hi all-
>
> I am a Linux newbie, so please forgive my ignorance. I have an i586 box
> running SuSE Linux 9.0 and it has a Seagate STT3401A IDE tape drive. I
> tried using tar, and I got I/O errors, and after fishing around on
> Google I found out that the ide-tape module doesn't work, but the
> ide-scsi does. Ok, installed that (did rmmod and modprobe) and now I
> can tar to/from the tape drive. I can also run Taper, but I don't much
> like the interface, and for some reason I can't get Taper to execute via
> cron. I'd rather use flexbackup anyway, because it seems
> cleaner/better. However.
>
> Now that I have the ide-scsi module installed, flexbackup tries to do a
> mt -f /dev/nst0 setblk and defblksize and gets an I/O error and fails.
> This happens even if I do flexbackup -test-tape-drive. Presumably
> because my tape drive isn't really a SCSI drive. ?
>
> I read the flexbackup FAQ and tried setting $mt{'setblk'} = '' or
> $mt{'setblk'} = 'nop' but it doesn't make any difference, I still get
> the error. I tried the -ignore-errors switch but it still failed.
>
> Has anyone out there been able to use and IDE tape drive with
> flexbackup? I'd greatly appreciate any help.
>
> Next time, I'm buying a SCSI tape drive!
>
> Thanks,
> Toby
>
>
I'm using a Seagate ST20000A drive, and had the same problems, try
setting differnt block sizes, I use $blksize=32, $mt_blksize=0
successfully. Use the"-test-tape-drive" option until you find the correct
one. Also, ensure you have the latest flexbackup, 1.2.1
from http://flexbackup.sourceforge.net/
--------------------------------------------------------------------------
PLEASE NOTE: NEW EMAIL ADDRESS, please change your nicknames, thanks.
Roger Pryor P. Eng. Email: [EMAIL PROTECTED]
Pryor and Pryor Inc. Telephone: (+1) 604-685-2621
602 - 1230 Comox Street, Internet: http://www.pryor-and-pryor.com
Vancouver, B.C., V6E 1K7, Canada
-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click
_______________________________________________
flexbackup-help mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/flexbackup-help
