Dear flexbackup user’s
I try to user flexbackup since 3 weeks, and for the moment the result
arent so good.
My problem is the next one.
When I made new index with –newtape, it takes more than half an hour to
make it.
My tape is 4 Go storage (so quietly small) and my flexbackup.conf is the
next one.
And another is anyboy can help me to define exactly what the bocksize is
and how to configure it .
Thanks for all
# -*-Mode: perl-*-
# ----------------------------------------------------------------------
# Flexbackup configuration file
# check "flexbackup -help" for usage information
# ----------------------------------------------------------------------
# General configuration section
# Archive type? afio, dump, tar, cpio, star, pax, zip, lha, ar, shar
# 'copy' or 'rsync' are extra options if running in archive-to-disk mode.
# 'filelist' dumps a list of files in your cwd - for debugging
setup/exclusion
$type = 'afio';
# Configure backup "sets".
# Not needed if you use "-dir <dir>" to backup one tree at a time.
# Each set is a simple space-separated list of filesystems
# Remote filesystems should denoted as 'host:dir'
# You can use anything (other than 'all') as set names
#
# Example:
# $set{'set1'} = "/home /usr";
# $set{'set2'} = "/dir3 machine2:/dir4 machine3:/dir5";
#
# "-set all" will back up all defined sets. If you are doing a full backup
# using tapes, each "set" will go onto a different tape and you will be
# prompted for tape change in between.
#
$set{'backup'} = "/home";
# Subtree pruning
# A space-separated list of directories to prune from each backup.
# Key is a filesystem or host:dir spec as outlined above
# regular expressions allowed (not shell-type wildcards!)
$prune{'/'} = "tmp proc";
# Compression
$compress = 'gzip'; # one of false/gzip/bzip2/lzop/zip/compress/hardware
$compr_level = '4'; # compression level (1-9) (for gzip/bzip2/lzop/zip)
# Buffering program - to help streaming
$buffer = 'buffer'; # one of false/buffer/mbuffer
$buffer_megs = '10'; # buffer memory size (in megabytes)
$buffer_fill_pct = '75'; # start writing when buffer this percent full
$buffer_pause_usec = '100'; # pause after write (tape devices only)
# Device to backup to. -->> non-rewinding version, please! <<--
#
# Examples:
# Linux SCSI: /dev/nst0 Linux IDE: /dev/nht0
# Linux ftape: /dev/nqft0 FreeBSD SCSI: /dev/nrsa0 (4.x compat
device node)
# FreeBSD SCSI: /dev/nsa0 (5.x)
#
# If a directory, will archive to files in that directory rather than a
device
# If "host:/dev/tapedevice", will use remote tape drive via rsh/ssh
#
$device = '/dev/st0';
# Block size (in kilobytes!) to use for archive programs and dd. Default is
# 10 for most things. Some tape drives need 32 or 64. Set to '0' to
# disable all blocking
#$blksize = '0.5';
$blksize = '10';
#$blksize = '64';
#$blksize = '32';
#$blksize = '512';
#$blksize = '';
# Block size (in bytes!) to use for the tape device, with "mt setblk" or
# equivalent. If set to 0, will use "variable" block size for the tape
# device (which is recommended). Comment out or set to "$blksize * 1024" to
# have it be the same as the archiver block size above.
$mt_blksize = "10240";
# Padding. True to pad blocks to blocksize
# (devices only, not used when archiving to files)
$pad_blocks = 'true';
# Other global flags
$remoteshell = 'ssh'; # command for remote shell (rsh/ssh/ssh2)
$remoteuser = ''; # if non-null, secondary username for remote shells
$label = 'true'; # somehow store identifying label in archive?
$verbose = 'true'; # echo each file?
$sparse = 'true'; # handle sparse files?
$indexes = 'true'; # false to turn off all table-of-contents support
# If backing up to files, use static filenames - no date stamp
# (same level backup of same directory will overwrite old backups)
$staticfiles = 'false';
# True to try and preserve file access times during backup, if the selected
# archive program can do so. Note that if this is true, -cnewer checks (file
# permission/status changes only, not content) are turned off when deciding
# which files to archive on the local system.
$atime_preserve = 'false';
# Span across filesytems? ("dump" will ignore this option)
# Set to "false" (don't) , "local" (all but nfs/smbfs), or "all"
(everything)
$traverse_fs = 'false';
# Exclude files that match these *regular expressions* (not shell wildcards)
# from the backups (no affect on 'dump' archives). You can list more
than one,
# just keep incrementing the index in the brackets for each. Also,
strip off
# leading directories (the filesystem specs above or the "-dir" flag).
# Matches paths, not filenames, so put .* on the front/back as needed.
# Comment these out to exclude nothing.
$exclude_expr[0] = '.*/[Cc]ache/.*';
$exclude_expr[1] = '.*~$';
# If true (default), and using a tape device, level zero "set" backups
# assume you want to erase and use a new tape for each set. If false, level
# zero "set" backups append to tapes. To force an erase for any backup,
# use "-erase" on the commandline.
$erase_tape_set_level_zero = 'true';
# Set this to "true" to make erase operations just call "mt rewind" - not
# "mt rewind' followed by "mt erase". (For some tape drives, erase takes
# hours rather than seconds or is otherwise undesirable)
$erase_rewind_only = 'false';
# ----------------------------------------------------------------------
# Log/stamp files, path for temporary files
$logdir = '/var/log/flexbackup'; # directory for log files
$comp_log = 'gzip'; # compress log?
false/gzip/bzip2/lzop/compress/zip
$staticlogs = 'false'; # static log filenames w/ no date stamp
$prefix = ''; # log files will start with this prefix
$tmpdir = '/tmp'; # used for temporary refdate files, etc
$stampdir = '/var/lib/flexbackup'; # directory for backup timestamps
$index = '/var/lib/flexbackup/index'; # DB filename for tape indexes
$keyfile = '00-index-key'; # filename for keyfile if archiving
to dir
$sprefix = ''; # stamp files will start with this
prefix
# ----------------------------------------------------------------------
# Parameters for 'afio' only
# File extensions that should not be compressed (seperate with spaces)
$afio_nocompress_types = 'mp3 MP3 Z z gz gif zip ZIP lha jpeg jpg JPG
taz tgz deb rpm bz2 lzo';
# True to show block numbers
$afio_echo_block = 'false';
# Files less than this size (kilobytes) won't be compressed
$afio_compress_threshold = '3';
# Maximum amount of memory (megabytes) to use for temporary storage of
# compression results. If a compressed file is bigger than this,
compression
# will have to run twice on the file (see manpage).
$afio_compress_cache_size = '2';
# ----------------------------------------------------------------------
# Parameters for 'tar' only
# True to show record numbers
$tar_echo_record_num = 'false';
# ----------------------------------------------------------------------
# Parameters for 'cpio' only
# Format of cpio archive
$cpio_format = 'newc';
# ----------------------------------------------------------------------
# Parameters for 'dump' only
# Estimated tape size (in kilobytes). This number doesn't really do much
# but help 'dump' get size estimates if set to zero uses 'dump -a'
$dump_length = '0';
# True to use /etc/dumpdates (could mess things up if you dump
subdirectories
# of mount points). False to use flexbackup's timestamps.
$dump_use_dumpdates = 'false';
# ----------------------------------------------------------------------
# Parameters for 'star' only
# Use fifo (buffering)? (you probably want to set $buffer=false above if so)
$star_fifo = 'true';
# Handle ACLs?
$star_acl = 'true';
# Format of star archive
$star_format = 'exustar';
# True to show block numbers
$star_echo_block_num = 'false';
# ----------------------------------------------------------------------
# Parameters for 'pax' only
# Format of pax archive
$pax_format = 'ustar';
# ----------------------------------------------------------------------
# Parameters for 'zip' only
# File extensions that should not be compressed (seperate with spaces)
$zip_nocompress_types = 'mp3 MP3 Z z gz gif zip ZIP lha jpeg jpg JPG taz
tgz deb rpm bz2 lzo';
# ----------------------------------------------------------------------
# Parameters for 'package delta' backups
# Archive a list of all installed packages in the top level of each backup?
# Can be 'false', 'true' (save it for any backup), or
# 'rootonly' (saves list only if the filesystem is '/')
$pkgdelta_archive_list = 'rootonly';
# Archive files not "owned" by packages?
$pkgdelta_archive_unowned = 'true';
# Archive any package-owned files which have been modified?
$pkgdelta_archive_changed = 'true';
# ----------------------------------------------------------------------
# Paths to commands. Default will look for them in $PATH. Use this if
# you want to set commands explicitly. You can use full paths or just
# change command names.
#
# Example: If GNU tar is called "gtar" on your system:
# $path{'tar'} = 'gtar';
#
# Or can be used to "sudo" certain commands. Examples:
# $path{'find'} = 'sudo find';
# $path{'dump'} = 'sudo dump';
# $path{'afio'} = 'sudo -u nonrootuser afio';
#
# ----------------------------------------------------------------------
# mt operation overrides. Set if flexbackup doesn't know the right mt
# command(s) for your OS/device, or you want to override things.
#
# Example: use "mt status" instead of "mt tell"
# $mt{'tell'} = 'status';
######################################################################
#
# $Id: flexbackup.conf,v 1.74 2003/09/21 22:59:58 edwinh Exp $
# $Name: v1_2_1 $
#
# Leave '1;' on the the next line - for perl 'require'
1;
Cordialement,
Erwan CHEVALIER
*Consulting & Systems Integration*
**Email** : [EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>
*Tél. * : +33 (0)1 58 13 88 41
*Web* : www.bt.com/consulting <http://www.bt.com/consulting>
|
********************************************************************
This email may contain information which is privileged or confidential.
If you are not the intended recipient of this email, please notify the
sender immediately and delete it without reading, copying, storing,
forwarding or disclosing its contents to any other person
Thank you
Check us out at http://www.bt.com/consulting
********************************************************************
|
