Right, you are using FB to compile your app. You need to change the nature of your project from AIR to Flex so that FB will run it as a Flex App rather than an AIR app (If you just ran the compiled swf through the browser, it should work fine).
FB isn't that nice at changing project natures, but there's a hacky fix you can make. Open up the .project file (note the period on the front) and remove the apollonature nature from the list, and make sure the flex and actionscript ones are in the list. It should look something like, <natures> <nature>com.adobe.flexbuilder.project.flexnature</nature> <nature>com.adobe.flexbuilder.project.actionscriptnature</nature> </natures> Next go into the project properties and under "Builders" make sure only the Flex builder is checked. If the AIR one is checked remove it. Open up the run dialog and set up a new configuration for your app, create it under the Flex Application part of the tree, and set up the config normally. Tah da! You should be able to run it in FB now (assuming I haven't missed any steps out... doing this from memory!) Gk. Gregor Kiddie Senior Developer INPS Tel: 01382 564343 Registered address: The Bread Factory, 1a Broughton Street, London SW8 3QJ Registered Number: 1788577 Registered in the UK Visit our Internet Web site at www.inps.co.uk <blocked::http://www.inps.co.uk/> The information in this internet email is confidential and is intended solely for the addressee. Access, copying or re-use of information in it by anyone else is not authorised. Any views or opinions presented are solely those of the author and do not necessarily represent those of INPS or any of its affiliates. If you are not the intended recipient please contact [email protected] ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of markgoldin_2000 Sent: 19 March 2009 15:58 To: [email protected] Subject: [flexcoders] Re: Convert Air app. to Flex I did. Here is what I am getting when I am running it: Command: "Flex SDK installation path......\adl.exe" project path\bin-debug\projectname-app.xml project path\bin-debug\ Output from command: invocation forwarded to primary instance
