Yeah, a lot of these books were written during beta days so things may be
off. Flex 2.0: Traing... used ICursorView but it is now IViewCursor (or vice
versa; one of the two is right). Then again, utils vs util COULD be a
mistype. :-)
On 12/2/06, {reduxdj} <[EMAIL PROTECTED]> wrote:
I just picked up these books, i guess since there is an open-market on
flex 2 books they are cranking 'em out and with the new nature of flex
it's unavoidable.
Like i've noticed in the AS 3.0 cookbook, the flash.utils is flash.util
Errata sure Sucka!
Patrick
John C. Bland II wrote:
> Starting before the first panel, wrap the rest (down to the last
> </mx:VBox>) in an HBox (see below). Keep in mind they wrote a lot of
> this book during alpha/beta days of Flex 2. There may be some code
> inconsistencies here/there.
>
> <?xml version="1.0" encoding="utf-8"?>
> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml
> <http://www.adobe.com/2006/mxml>"
> layout="absolute">
> <mx:ApplicationControlBar dock="true">
> <mx:LinkButton label="All"/>
> <mx:LinkButton label="Sales"/>
> <mx:LinkButton label="Categories"/>
> <mx:LinkButton label="Comparison"/>
> </mx:ApplicationControlBar>
>
> <mx:HBox>
> <mx:Panel id="sales"
> width="100%" height="100%"
> title="Sales Chart">
> <mx:ControlBar>
> </mx:ControlBar>
> </mx:Panel>
>
> <mx:VBox id="rightCharts"
> width="100%" height="100%">
> <mx:Panel id="type"
> width="100%" height="100%"
> title="Category Chart">
> <mx:ControlBar>
> </mx:ControlBar>
> </mx:Panel>
> <mx:Panel id="comp"
> width="100%" height="100%"
> title="Comparison Chart">
> <mx:ControlBar>
> </mx:ControlBar>
> </mx:Panel>
> </mx:VBox>
> </mx:HBox>
> </mx:Application>
>
>
> On 12/1/06, *Abe Burnett* <[EMAIL PROTECTED]<abe.burnett%40gmail.com>
> <mailto:[EMAIL PROTECTED] <abe.burnett%40gmail.com>>> wrote:
>
> Hi there,
>
> I've recently purchased the book, Flex 2: Training from the Source.
> I've hit on a problem with the code in one of the lessons.
>
> Basically, given the following code (which I've triple checked is
> correct--per the book, anyway), I end up with Sales Chart superimposed
> (it appears) over both Category Chart and Comparison Chart (which
> share a VBox). This is in contrast to the image in the book which
> depicts the Sales Chart on the left, and Category Chart above
> Comparison Chart to the Right. I can somewhat fix the problem by
> wrapping Sales Chart and the VBox enclosing Category Chart and
> Comparison Chart into an HBox, but it still doesn't look as
> aesthetically pleasing as the image on page 58 of the book.
>
> Has anyone else had the same problem with this book, and how is it
> resolved?
>
> The code:
>
> I've recently purchased your excellent book, Flex 2: Training from the
> Source. I'm plowing through Lesson 3 and run into a case where my
> results don't match what the book suggests I should have. Opening the
> code provided on the CD indicates that whatever error I have exists in
> the code on CD too (so it's not just me--user/learner operator). The
> problem is that the code for Dashboard.mxml as instructed ends up with
> views laying on top of one another. My VBox "rightCharts" laying under
> (I believe) my Panel "sales." I'm very new to Flex, so I thought I'd
> seek your assistance while I continue to try and figure out what's
> wrong. I did find one partial solution to the layout problem--a
> solution that at least puts the VBox for Category Chart and Comparison
> Chart on the right side of the screen and out of the way of the Panel
> Sales Chart. That solution involves wrapping both the Panel Sales
> Chart and the VBox enclosing Category Chart and Comparison Chart in an
> HBox. The problem with this solution is that it doesn't nicely offset
> the Sales Chart/Category Chart/Comparison Chart as depicted on
> page 58
> of the book. Instead it has them all laid out correctly, but the
> borders of each run from the very bottom of the screen to the very top
> of the screen, underneath the ApplicationControlBar. And from one side
> of the screen to the other. Layed out correctly, but not
> aesthetically
> pleasing as the book depicts. I'll keep playing with it, but in the
> meantime, this code doesn't render the desired results that the book
> indicates it should:
>
> <?xml version="1.0" encoding="utf-8"?>
> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml
> <http://www.adobe.com/2006/mxml>"
> layout="absolute">
> <mx:ApplicationControlBar dock="true">
> <mx:LinkButton label="All"/>
> <mx:LinkButton label="Sales"/>
> <mx:LinkButton label="Categories"/>
> <mx:LinkButton label="Comparison"/>
> </mx:ApplicationControlBar>
>
> <mx:Panel id="sales"
> width="100%" height="100%"
> title="Sales Chart">
> <mx:ControlBar>
> </mx:ControlBar>
> </mx:Panel>
>
> <mx:VBox id="rightCharts"
> width="100%" height="100%">
> <mx:Panel id="type"
> width="100%" height="100%"
> title="Category Chart">
> <mx:ControlBar>
> </mx:ControlBar>
> </mx:Panel>
> <mx:Panel id="comp"
> width="100%" height="100%"
> title="Comparison Chart">
> <mx:ControlBar>
> </mx:ControlBar>
> </mx:Panel>
> </mx:VBox>
>
> </mx:Application>
>
>
>
>
> --
> John C. Bland II
> Chief Geek
> Katapult Media, Inc. - www.katapultmedia.com
> <http://www.katapultmedia.com>
> ---
> Biz Blog - http://blogs.katapultmedia.com/jb2
> <http://blogs.katapultmedia.com/jb2>
> Personal Blog - http://blog.blandfamilyonline.com
> <http://blog.blandfamilyonline.com>
> http://www.lifthimhigh.com <http://www.lifthimhigh.com> - "Christian
> Products for Those Bold Enough to Wear Them"
> Home of FMUG.az - http://www.gotoandstop.org <http://www.gotoandstop.org
>
> Home of AZCFUG - http://www.azcfug.org <http://www.azcfug.org>
>
--
John C. Bland II
Chief Geek
Katapult Media, Inc. - www.katapultmedia.com
---
Biz Blog - http://blogs.katapultmedia.com/jb2
Personal Blog - http://blog.blandfamilyonline.com
http://www.lifthimhigh.com - "Christian Products for Those Bold Enough to
Wear Them"
Home of FMUG.az - http://www.gotoandstop.org
Home of AZCFUG - http://www.azcfug.org
