Larry, I don't know, unless it is in the AGC.. 6 Meters is funny like that thou.. I have seen it (noise floor) drift up and down, one time I thought my radio was broken.. :-) You might see if you see the same with the Pre2 turned off, just a thogutht. I'll try to listen on 6 some..
73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595 Email: [email protected] Web: www.flex-radio.com "Tune in excitement!" ™ On Sun, Jan 24, 2010 at 1:50 AM, Larry da Ponte <[email protected]>wrote: > I noticed this evening that while monitoring 6M during the late evening I > noticed that the RX noise would come up slowly and if I clicked the MOX > button the noise would drop right back down immediately. Is this normal? > I > haven't noticed this on any other band. Noise floor starts at -127dbm and > comes up to -115 - not a huge jump but very noticeable. Wonder why simply > hitting the MOX knocks the noise back down. Couple of minutes later it > happens again. Settings: > > AGC-T: 70 > AGC: Med > RX Gain: Pre2 > Sample rate: 96kHz > Buffer size: 1024 (both firewre and PowerSDR set at 1024) > Operation Mode: Safe Level 1 > > > F3K > Firmware 2.0.0.4 > PowerSDR 1.19.3 SVN: 3444 > FireWire 3.5.0.7171 > OS: Win 7 32bit > PC: Laptop - Lenova Thinkpad T400 > > -- > > 73's > N7BCP > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using alpha and beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
