Tim, I've configured WL and PSDR per:
http://kc.flex-radio.com/KnowledgebaseArticle50366.aspx I can get CW sent but the characters are shortened - I can't get the "hang time" to work so that the characters are sent completely and without corruption. CW sent via the Flex keyer works fine. But CW sent from WL using a VSP to the keyer isn't holding the transmit up between symbols. Stu K6TU -----Original Message----- From: Tim Ellison [mailto:[email protected]] Sent: Friday, May 28, 2010 7:47 PM To: Stu Phillips; [email protected] Subject: RE: Problems with Keyer control via virtual serial port? Can you describe the behavior you are experiencing in detail so we can better know how it isn't working? -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stu Phillips Sent: Friday, May 28, 2010 10:22 PM To: [email protected] Subject: [FlexEdge] Problems with Keyer control via virtual serial port? Anyone tried using PSDR 2.0 Beta (Vista X64 in my case) with a logging program like WRITELOG to generate CW via a VSP? I'm having a challenge finding a configuration that works and I think I'm using the same recipe that has worked in the past. Set Writelog to use a VSP for CW - no poll, PTT control via CAT In PSDR, set Keyer (on Setup DSP) Primary port to Radio, Secondary to the other end of the VSP from Writelog - PTT line none, Key line RTS. I was hoping to use PSDR 2.0 for the WPX CW content this weekend but maybe I need to drop back? Any help appreciated! Stu K6TU _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
