Yet more experimentation - sorry for all the noise... WL configured with PSDR per...
http://kc.flex-radio.com/KnowledgebaseArticle50366.aspx Break-in enabled so that "key" closure causes transmit... I've had to increase the break in delay to about 200 mS to get the "hold time" to be ok so that CW sent from the VSP port sounds ok. I don't remember having to change the break in settings to this kind of value in the past but its been almost 6 months since the last CW contest I entered. Any ideas? Stu K6TU -----Original Message----- From: Tim Ellison [mailto:[email protected]] Sent: Friday, May 28, 2010 7:47 PM To: Stu Phillips; [email protected] Subject: RE: Problems with Keyer control via virtual serial port? Can you describe the behavior you are experiencing in detail so we can better know how it isn't working? -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Stu Phillips Sent: Friday, May 28, 2010 10:22 PM To: [email protected] Subject: [FlexEdge] Problems with Keyer control via virtual serial port? Anyone tried using PSDR 2.0 Beta (Vista X64 in my case) with a logging program like WRITELOG to generate CW via a VSP? I'm having a challenge finding a configuration that works and I think I'm using the same recipe that has worked in the past. Set Writelog to use a VSP for CW - no poll, PTT control via CAT In PSDR, set Keyer (on Setup DSP) Primary port to Radio, Secondary to the other end of the VSP from Writelog - PTT line none, Key line RTS. I was hoping to use PSDR 2.0 for the WPX CW content this weekend but maybe I need to drop back? Any help appreciated! Stu K6TU _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
