Jim,I am using the Dynex DX-PC12PF which has an LSI Chip.What is strange is I 
did not have this problem with PSDR 1.18.6.Only when I loaded the 2.0 Beta 
software, FW driver and firmware.Could this be a BUG?
73 de Bill - K2rig

Bill Nicolson

Colonia, NJ

> From: [email protected]
> Hi Bill,
> 
> I am wondering if you have an LSI chip 1394 Card?
> If you run the scan under the system tab in the FlexRadio Firewire Driver,
> you can get a report on the 1394 hardware and driver.
> I have found that the LSI chip card under Windows 7 have only worked with my
> FlexRadio 3000 turned on at boot time.
> I can force them to come alive by disabling and re-enabling the device
> driver, also.
> I have talked with Microsoft and they indicate this has been reported with
> other 1394 connections and the LSI hardware platform.
> I have another card that has the TI chips set. It works correctly in all
> situations. 
> 
> Jim Fuller
> 
> -----Original Message-----
> First I'll try to describe my setup:
> F3K
> PSR 2.0 Beta 3715 + Firewire Drv 3.5.2.8028 + Firmware 2.0.1.2
> Win7 Pro x86 on a Core2duo 2.93Ghz w/ 2Gb Ram
> 
> When I start my Flex system with the Beta 2.0 setup above, 
> I must have the Flex-3000 powered up before booting the PC.
> If I boot the PC first and then power up the F3K the PC does not see the F3K.
> I did not have this problem with the PSDR 1.18.6 setup.
> 
> Thanks,
> Bill K2rig 

                                          
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software development and experimentalist who are 
using alpha and beta versions of the software.

Reply via email to