I am encountering the same problem with TI chipset and Windows OHCI driver:

Windows 7 Pro 64-bit
MSI G41M4-F motherboard, Pentium dual core E5400 @ 2.7 GHz, 4 GB RAM
Syba Low Profile PCI-Express 1394b/1394a (2B1A) Card, TI Chipset, Extra
Regular Bracket SD-PEX30009 PowerSDR 2.0.0 Beta, Driver version 3.5.2.8028,
PAL version 3.5.2.8028, buffer size 2048, Safe mode level 1, typical latency
150-250 ms, max @ 800ms.

System info:
OS: Microsoft Windows 7 64-bit [6.1.7600]
Looking for OHCI 1394 Host Controllers...
1:
  Vendor : (104C) Texas Instruments
  Chipset: (823F) XIO2213
  Revision: 01
  Support:  Compatible, no known issues.
Done.

Thinking the problem might be the Windows OHCI drivers, I tried installing
the OEM drivers. The Syba card shipped with a driver disk but the driver is
not signed for Windows 7. I downloaded and installed updated ubCorePro64
from unibrain but the install blue-screened Windows with
MULTIPLE_IRP_COMPLETE_REQUESTS error. so I had to revert back to the Windows
OHCI drivers.

John,
KJ7B
On Sat, Jun 12, 2010 at 12:56 PM, Dudley Hurry <[email protected]>wrote:

> Bill,
>
> You may need to run the "Legacy"   OHCI driver for the FireWire card.
>
> http://kc.flex-radio.com/KnowledgebaseArticle50433.aspx
>
> This might improve the FW consistency  .
>
>
> 73,
> Dudley
>
> WA5QPZ
> FlexRadio Systems
>
> (512) 535-4713, Option 2
> Email: [email protected]
> Web: www.flex-radio.com
>
> "Tune in excitement!" ™
>
>
>
> On Fri, Jun 11, 2010 at 7:18 AM, Bill Nicolson <[email protected]> wrote:
>
> >
> > First I'll try to describe my setup:
> >
> > F3K
> > PSR 2.0 Beta 3715 + Firewire Drv 3.5.2.8028 + Firmware 2.0.1.2
> > Win7 Pro x86 on a Core2duo 2.93Ghz w/ 2Gb Ram
> >
> >
> > When I start my Flex system with the Beta 2.0 setup above,
> >
> > I must have the Flex-3000 powered up before booting the PC.
> >
> > If I boot the PC first and then power up the F3K the PC does not see the
> > F3K.
> >
> > I did not have this problem with the PSDR 1.18.6 setup.
> >
> >
> >
> > Thanks,
> >
> > Bill K2rig
> >
> > Bill Nicolson
> > Colonia, NJ
> >
> > _________________________________________________________________
> > Hotmail is redefining busy with tools for the New Busy. Get more from
> your
> > inbox.
> >
> >
> http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2
> > _______________________________________________
> > Flexedge mailing list
> > [email protected]
> > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
> > This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is
> used
> > for posting topics related to SDR software development and
> experimentalist
> > who are using alpha and beta versions of the software.
> >
> _______________________________________________
> Flexedge mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
> This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used
> for posting topics related to SDR software development and experimentalist
> who are using alpha and beta versions of the software.
>
>
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software development and experimentalist who are 
using alpha and beta versions of the software.

Reply via email to