This subject has been discussed a number of times on this reflector, perhaps 
you missed the postings.  Here is one from Tim Ellison that describes how the 
firmware for version 2.0 is handled.  It is actually packed with the PowerSDR 
code and is placed in a folder for install.  Tim references a knowledgebase 
article that deals with the issue as well.

Once you determine where on your machine the file resides, then you use the 
Flex FireWire software to install it on your 3000.  This is different from the 
older versions which were standalone applications. As I remember, my XP machine 
had it under My Documents someplace. My WIN 7 machine has it under general 
documents as flexloader firmware, with several more folders below that.

Here's the post

All 2.x firmware is now delivered via the PowerSDR Integrated Installer.  This 
information was provided here on FlexEdge when the PowerSDR v2.0.0 Beta was 
released.  It is in the FlexEdge archives.

It is not documented in the KB because the Installer needs modifications done 
to it before the documentation can be written.  It is part of the Beta 
deployment process.

The Release Notes were also deficient in there description of where the 
firmware was located and this too is being resolved.  I am reprinting the 
firmware information below again for convenience.


For those who will need to update your firmware, once you have run the new 
Integrated Installer and the PC has rebooted (if the FLEX Firewire driver was 
installed), do not start PowerSDR v2.0.0 from the fancy new icon.

Instead, you will want to update your firmware first or PowerSDR will give you 
a warning that you are not running the correct firmware.  The Integrated 
Installer has placed a copy of the firmware binary on your PC.

Using the URL below, the following KB article tells you where to find and how 
to update your firmware.

http://kc.flex-radio.com/KnowledgebaseArticle50441.aspx

Just skip Phase I and start at Phase II - Upgrading the FLEX-5000/3000 with New 
Firmware.

On Jul 14, 2010, at 11:48 PM, Kent Tiburski wrote:

>  I guess that I must have some sort of disease as I can't
> get any reply or help. So be it.  Perhaps I can sell my 3K
> cheap as the so called "help" isn't forthcoming.  Rice boxes
> looking pretty attractive right now,  think about that Flex!
> 
> Kent, K6FQ
> 
> 
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Kent
> Tiburski
> Sent: Sunday, July 11, 2010 1:10 PM
> To: 'Tim Ellison'; [email protected]
> Subject: Re: [FlexEdge] 2.0 Beta
> 
> Hi All,
> 
> Had a few spare minutes today and attempted to install the
> 2.0 beta release.  All went well till PSDR wanted ver 2.0
> firmware.  I went through every file in the downloads pages
> and it isn't there.  Any ideas?  I have PSDR 1.18.5 in
> another directory.  Do I need to uninstall it and it's
> components?
> 
> Thanks, 73
> 
> Kent, K6FQ
> 
> 
> 
> -----Original Message-----
> From: Tim Ellison [mailto:[email protected]] 
> Sent: Monday, July 05, 2010 4:36 PM
> To: Kent Tiburski; [email protected]
> Subject: RE: [FlexEdge] 2.0 Beta
> 
> Look for my post sent yesterday @ 645 PM EDT
> 
> 
> Here is it again.
> http://support.flex-radio.com/Downloads.aspx?id=330
> 
> http://support.flex-radio.com/Downloads.aspx?id=329
> 
> 
> -Tim
> 
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Kent
> Tiburski
> Sent: Monday, July 05, 2010 7:26 PM
> To: 'Kent Tiburski'; [email protected]
> Subject: Re: [FlexEdge] 2.0 Beta
> 
> Never saw this post on the reflector.
> 
> -----Original Message-----
> From: Kent Tiburski [mailto:[email protected]]
> Sent: Sunday, July 04, 2010 3:09 PM
> To: '[email protected]'
> Subject: 2.0 Beta 
> 
> Hi,
> 
> Is there a version of 2.0 that is working with the 3K?
> Where can I download or am I better off waiting for the
> official release?  Thanks.
> 
> 73, Kent, K6FQ
> 
> 
> _______________________________________________
> Flexedge mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-ra
> dio.biz
> This is the FlexRadio Systems e-mail Reflector called
> FlexEdge.  It is used for posting topics related to SDR
> software development and experimentalist who are using alpha
> and beta versions of the software.
> 
> 
> _______________________________________________
> Flexedge mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-ra
> dio.biz
> This is the FlexRadio Systems e-mail Reflector called
> FlexEdge.  It is used for posting topics related to SDR
> software development and experimentalist who are using alpha
> and beta versions of the software.
> 
> 
> _______________________________________________
> Flexedge mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
> This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used 
> for posting topics related to SDR software development and experimentalist 
> who are using alpha and beta versions of the software.


_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software development and experimentalist who are 
using alpha and beta versions of the software.

Reply via email to