Hi Geep How much do you want for it?
It's easy to upgrade to the Beta 2.0 firmware with the new Driver/Firmware/PowerSDR. 1st: uninstall old FLEX driver 2nd: turn off FLEX Radio 3rd: reboot the computer 4th: load the BETA "Setup 2.0Beta 3715 052610.exe" to load new firewire driver 3.5.2.8028 and PowerSDR2.0.0 5th: reboot computer (may not need this step but I would do it anyway) 6th: turn on the radio 7th: step thru and confirm ALL the Windows Hardware setup to install ALL the FLEX Hardware (this step may be after step 13 I can't remember for sure). 8th: Bring up the FlexRadio Driver by clicking on the "FlexRadio" ICON. 9th: Click on Firmware Loader button. 10th: Click on Browse, then you should see the firmware "FLEX-3000 (what ever version).bin file 11th: Click open 12th: now you should be back to the Blue Driver screen, Now Click "Upload" 13th: You should hear the Radio click a couple of times. 14th: Start the NEW "PowerSDR" and all should work just fine. This is as simple and none cryptic as I can make it so I Hope this helps And really threats just make YOU look bad with hundreds of other Flexers running the BETA software so we know it works and works well. 73's Bret Mills WX7Y -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Richard Clafton Sent: Thursday, July 15, 2010 7:50 AM To: [email protected] Subject: Re: [FlexEdge] 2.0 Beta What you refer to as your bluebox mistake will be someone else's gain. Don't give up so easy. This is after all BETA software you are trying to use. On Windows machines simply typing: %homepath%\Documents\FLEX Firmware In the Explorer location bar will present you with the Firmware folders. ------------------------------- Richard A Clafton, W5\G7EIX 'the brITish guy' - [email protected] RIROC - Hosting - Development - Technology - www.riroc.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Kent Tiburski Sent: Wednesday, July 14, 2010 11:26 PM To: 'Geep Howell' Cc: [email protected] Subject: Re: [FlexEdge] 2.0 Beta Geep, Thank you sir. As I read this, it is so cryptic. No body can post simple instructions. I guess I'm stuck with the software that I have.... that is till I offload my bluebox mistake. I have a lot of influence for sales. Flex, you need to think about that. Kent, K6FQ -----Original Message----- From: Geep Howell [mailto:[email protected]] Sent: Wednesday, July 14, 2010 9:05 PM To: Kent Tiburski Cc: [email protected] Subject: Re: [FlexEdge] 2.0 Beta This subject has been discussed a number of times on this reflector, perhaps you missed the postings. Here is one from Tim Ellison that describes how the firmware for version 2.0 is handled. It is actually packed with the PowerSDR code and is placed in a folder for install. Tim references a knowledgebase article that deals with the issue as well. Once you determine where on your machine the file resides, then you use the Flex FireWire software to install it on your 3000. This is different from the older versions which were standalone applications. As I remember, my XP machine had it under My Documents someplace. My WIN 7 machine has it under general documents as flexloader firmware, with several more folders below that. Here's the post All 2.x firmware is now delivered via the PowerSDR Integrated Installer. This information was provided here on FlexEdge when the PowerSDR v2.0.0 Beta was released. It is in the FlexEdge archives. It is not documented in the KB because the Installer needs modifications done to it before the documentation can be written. It is part of the Beta deployment process. The Release Notes were also deficient in there description of where the firmware was located and this too is being resolved. I am reprinting the firmware information below again for convenience. For those who will need to update your firmware, once you have run the new Integrated Installer and the PC has rebooted (if the FLEX Firewire driver was installed), do not start PowerSDR v2.0.0 from the fancy new icon. Instead, you will want to update your firmware first or PowerSDR will give you a warning that you are not running the correct firmware. The Integrated Installer has placed a copy of the firmware binary on your PC. Using the URL below, the following KB article tells you where to find and how to update your firmware. http://kc.flex-radio.com/KnowledgebaseArticle50441.aspx Just skip Phase I and start at Phase II - Upgrading the FLEX-5000/3000 with New Firmware. On Jul 14, 2010, at 11:48 PM, Kent Tiburski wrote: > I guess that I must have some sort of disease as I can't > get any reply or help. So be it. Perhaps I can sell my 3K > cheap as the so called "help" isn't forthcoming. Rice boxes > looking pretty attractive right now, think about that Flex! > > Kent, K6FQ > > > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Kent > Tiburski > Sent: Sunday, July 11, 2010 1:10 PM > To: 'Tim Ellison'; [email protected] > Subject: Re: [FlexEdge] 2.0 Beta > > Hi All, > > Had a few spare minutes today and attempted to install the > 2.0 beta release. All went well till PSDR wanted ver 2.0 > firmware. I went through every file in the downloads pages > and it isn't there. Any ideas? I have PSDR 1.18.5 in > another directory. Do I need to uninstall it and it's > components? > > Thanks, 73 > > Kent, K6FQ > > > > -----Original Message----- > From: Tim Ellison [mailto:[email protected]] > Sent: Monday, July 05, 2010 4:36 PM > To: Kent Tiburski; [email protected] > Subject: RE: [FlexEdge] 2.0 Beta > > Look for my post sent yesterday @ 645 PM EDT > > > Here is it again. > http://support.flex-radio.com/Downloads.aspx?id=330 > > http://support.flex-radio.com/Downloads.aspx?id=329 > > > -Tim > > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Kent > Tiburski > Sent: Monday, July 05, 2010 7:26 PM > To: 'Kent Tiburski'; [email protected] > Subject: Re: [FlexEdge] 2.0 Beta > > Never saw this post on the reflector. > > -----Original Message----- > From: Kent Tiburski [mailto:[email protected]] > Sent: Sunday, July 04, 2010 3:09 PM > To: '[email protected]' > Subject: 2.0 Beta > > Hi, > > Is there a version of 2.0 that is working with the 3K? > Where can I download or am I better off waiting for the > official release? Thanks. > > 73, Kent, K6FQ > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-ra > dio.biz > This is the FlexRadio Systems e-mail Reflector called > FlexEdge. It is used for posting topics related to SDR > software development and experimentalist who are using alpha > and beta versions of the software. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-ra > dio.biz > This is the FlexRadio Systems e-mail Reflector called > FlexEdge. It is used for posting topics related to SDR > software development and experimentalist who are using alpha > and beta versions of the software. > > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-ra dio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
