Thanks Ralph, good idea I will give it a try the next time it happens. I have tried different antennas but that didn't cure the problem. Intermittent issues are always a pain. George W2GS
-----Original Message----- From: Ralph W5JGV [mailto:[email protected]] Sent: Sunday, September 05, 2010 2:58 PM To: George Steube; [email protected] Subject: RE: [FlexEdge] Receiver changing sensitivity > I am running PSDR 2.0.8/XP/3.3.2.8028. Occasionally after I transmit the > receiver noise level sensitivity drops to -150 on the pan adapter with the > received signal going down with it. <snip> If you are using a F5K, try RX/TX through a different antenna port. The symptoms sound like a defective antenna relay. I've had that happen on several radios over the past few years. 73, Ralph W5JGV - WD2XSH/7 _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
