Not trying to beat a dead horse here, but after a little bit of
experimentation, I have discovered that the Power SDR Console on a
1024x768 screen defaults to a window of approximately 1024x610 size,
i.e., ALMOST small enough to display perfectly on a typical netbook
screen of size 1024x600. Unfortunately, when run on a computer with only
a 1024x600 pixel screen, the software INSISTS on stretching itself
vertically so that many controls at the bottom of the screen are "cut
off". I have been able to run the software with little difficulty by
telling my laptop to configure itself as a 1024x768 virtual desktop with
a 1024x600 pixel window into that desktop. When I do, then the Power SDR
software console screen is not quite fully displayed, but by simply
moving the mouse pointer down below the bottom edge of the screen, the
1024x600 window scrolls down the virtual desktop and the remaining
controls become visible.
Basically, the reason for this message is that I feel that the software
has a subtle bug in the way it deals with the screen size. When there is
plenty of screen size available, it "scrunches" itself up to use only
part of the screen, but when the screen size is limited, it insists on
expanding itself vertically so that more of the screen than necessary is
lost from the bottom of the display. This is the exact OPPOSITE of the
proper behavior.
For more details, with pictures that show exactly what I mean, you can
go to:
http://www.qsl.net/w0jt/FLEX-1500/PSDR2-Screen.doc
This is a Microsoft Word document rather than a raw html page, but I was
sort of in a hurry and I do all of my web page design using Notepad.
Yes, I am a dinosaur in that regard!
I hope that this is helpful. Once again, thanks for the excellent
software we already have, and I am positive that it will get even better
soon when the non-Beta, production version is ready.
73 de W0JT (John P. Toscano)
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.