John, Just be lucky that your Netbook has the virtual screen SW to stretch and you are able to at least scroll to the part of the screen that you need.. Some netbooks do not have this feature in their video driver, but there is no way to stuff a 1024x768 image onto a native 1024x600 display without scrolling the screen . The next option is to go to an 11 or 12 inch netbook with a bigger screen.
73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: [email protected] Web: www.flex-radio.com "Tune in excitement!" ™ On Sun, Sep 5, 2010 at 3:57 PM, John P. Toscano <[email protected]> wrote: > Not trying to beat a dead horse here, but after a little bit of > experimentation, I have discovered that the Power SDR Console on a 1024x768 > screen defaults to a window of approximately 1024x610 size, i.e., ALMOST > small enough to display perfectly on a typical netbook screen of size > 1024x600. Unfortunately, when run on a computer with only a 1024x600 pixel > screen, the software INSISTS on stretching itself vertically so that many > controls at the bottom of the screen are "cut off". I have been able to run > the software with little difficulty by telling my laptop to configure itself > as a 1024x768 virtual desktop with a 1024x600 pixel window into that > desktop. When I do, then the Power SDR software console screen is not quite > fully displayed, but by simply moving the mouse pointer down below the > bottom edge of the screen, the 1024x600 window scrolls down the virtual > desktop and the remaining controls become visible. > > Basically, the reason for this message is that I feel that the software has > a subtle bug in the way it deals with the screen size. When there is plenty > of screen size available, it "scrunches" itself up to use only part of the > screen, but when the screen size is limited, it insists on expanding itself > vertically so that more of the screen than necessary is lost from the bottom > of the display. This is the exact OPPOSITE of the proper behavior. > > For more details, with pictures that show exactly what I mean, you can go > to: > http://www.qsl.net/w0jt/FLEX-1500/PSDR2-Screen.doc > > This is a Microsoft Word document rather than a raw html page, but I was > sort of in a hurry and I do all of my web page design using Notepad. Yes, I > am a dinosaur in that regard! > > I hope that this is helpful. Once again, thanks for the excellent software > we already have, and I am positive that it will get even better soon when > the non-Beta, production version is ready. > > 73 de W0JT (John P. Toscano) > > _______________________________________________ > Flexedge mailing list > [email protected] > http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz > This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used > for posting topics related to SDR software development and experimentalist > who are using beta versions of the software. > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
