Roger, This is a known bug that I discovered soon after v2.0.8 was made public. It has been entered into the bug tracking system, & I hope it is high enough priority to be fixed before v2 is officially released. It essentially destroys the usefulness of the radio as an SO2R solution in a single box.
The problem only occurs on FLEX-5000's with RX2 installed & turned on and when VFO A & VFO B are on different bands. Both the "A>B" & the "A<>B" buttons do not work correctly under these circumstances. VFO B goes to the band that VFO A was on but NOT to the frequency. If both VFO's are on the same band or if RX2 is turned off, all works properly. If you are using the "A>B" button, it is not a big deal since clicking the button again sets thing right. However, if you try to use the "A<>B" button, you lose the VFO A frequency. This is a VERY big deal, especially if you are a contester trying to use SO2R. Typically, you would be running a frequency on VFO A & doing search & pounce (S&P) on a different band on VFO B. If you hit the "A<>B" button, you just lost your "run" frequency! This is ABSOLUTELY unacceptable to a contester. 73, Ray, K9DUR http://k9dur.info _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
