This happens on VFO A as well. As soon as I scroll below the bottom
of the band, the bandswitch goes to "Gen" and the frequency is whatever
is at the top of the Gen frequency stack.
73,
Clay W7CE
On 9/6/2010 1:38 PM, Tim Ellison wrote:
I have added this to the developer's internal bug tracker as DE316
-Tim
-----Original Message-----
From: [email protected] [mailto:[email protected]]
On Behalf Of Ray - K9DUR
Sent: Monday, September 06, 2010 4:17 PM
To: [email protected]
Subject: [FlexEdge] Another Bug in v2.0.8 with FLEX-5000 w/RX2
Okay, I was double-checking the A<>B problem when VFO A& VFO B are on
different bands, when I stumbled across another bug.
1. Turn off RX2.
2. Set VFO B to any frequency close to either band edge on any band.
3. Put the mouse cursor one the digits of the VFO B frequency display.
4. Using the mouse wheel, scroll the digit up or down as required to move
the frequency past the band edge.
Frequency should now be just outside the band edge where you started.
Turn on RX2& repeat steps 2,3,& 4 above. VFO B frequency will now be
13.845 MHz. Weird!!!!
Problem does not appear when RX2 is turned off, only when it is on. All
bands go to the same frequency (13.845 MHz) when scrolled past the band
edge.
Tim, please confirm this& add it to the bug tracking system.
73, Ray, K9DUR
http://k9dur.info
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for
posting topics related to SDR software development and experimentalist who are
using beta versions of the software.
