Installed on Fujitsu TH700 (which does not have a rate control setting in the BIOS) and it did not fix the issue - still flat line.
So I then installed the custom driver and now works. I will test thoroughly this afternoon. But at least it is now working. I'm happy! -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tim (W4TME) Sent: Saturday, November 20, 2010 7:40 AM To: [email protected] Subject: [FlexEdge] QST for FLEX-1500 users having USB driver installation / operational issues To all FLEX-1500 Users, As you are probably aware, there have been some installation and operational issues related to the new USB streaming device driver for the FLEX-1500. These issues, which didn't show up during alpha testing, effect a small percentage of FLEX-1500 users. There were actually several individual issues that arose during the public beta testing including difficulty getting the drivers to install properly to adverse interactions with using certain newer USB chipsets (controllers). The FlexRadio development team has been working very diligently to characterize the issues over the past two weeks and believe that they understand the problems fairly well. As a result of those efforts, there is an updated FLEX-1500 Driver Patch Kit for PowerSDR v2.0.16 (Rev.D) along with a multi-procedure troubleshooting guide that describes how to install the FLEX-1500 Driver Patch Kit for PowerSDR v2.0.16 along with additional troubleshooting steps to get your radio operational using PowerSDR v2.0.16. If none of these troubleshooting procedures resolve your problems, there is a final procedure for reverting back to PowerSDR v2.0.8 which uses the higher latency Windows sound card drivers. Please feel free to contact FlexRadio Support ([email protected]) if you need assistance in running any of the troubleshooting procedures and particularly if none of the procedures work for your setup, as we need to collect this information in order to better understand the issues and get them resolved before the next beta release of PowerSDR 2.0.x The FLEX-1500 Driver Patch Kit for PowerSDR v2.0.16 Installation & Troubleshooting Guide can be downloaded here: http://support.flex-radio.com/Downloads.aspx?id=356 The updated FLEX-1500 Driver Patch Kit for PowerSDR v2.0.16, rev D. can be downloaded here: http://support.flex-radio.com/Downloads.aspx?id=355 -Tim --- W4TME FlexRadio Systems Internet Systems Admin. Product Verification Team Tune In ExcitementT _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
