K3TUF's Flexwire UCB board ( http://www.k3tuf.com/FW.html ) would do that if PSDR/SSDR would co-operate.. i.e. Send a unique FW I2C string for each band.

As it is now, DDUTil can generate a FW sequence per band change and pass it through PSDR to the FW port, But that is another piece of software..

AL, K0VM

On 9/1/2012 8:26 AM, Lloyd Berg wrote:
Hi Steve!

Thanks for the quick reply.

I would like to see a FLEX-6000 accessory that would output control lines
indicating Band Of Operation ( without going through a 3rd party PC based
application ).

I other words, I'd like to see an accessory that would provide an individual
"pull to ground" output for each band, 160m, 80m, 60m, etc all the way
through the VHF/UHF/microwave transverters.

This would be used for controlling amplifier band selection, selecting
antennas by band, selecting external transverters, etc.

Hope something like that will become available with signaling provided by
the Accessory Connector.

73

Lloyd - N9LB

   -----Original Message-----
   From: [email protected] [mailto:[email protected]]On Behalf Of
Stephen Hicks, N5AC
   Sent: Saturday, September 01, 2012 8:13 AM
   To: Lloyd Berg
   Cc: [email protected]
   Subject: Re: [FlexEdge] FLEX-6000 Accessory Connector


   We have not yet released a piece of equipment to connect to the accessory
port, but providing frequency data or band data from the I2C port is a
reasonable use for the port.  Did you have an existing piece of hardware in
mind that would be looking for I2C band data?



   Steve


   Stephen Hicks, N5AC, AAR6AM
   VP Engineering
   FlexRadio Systems™
   4616 W Howard Ln Ste 1-150
   Austin, TX 78728
   Phone: 512-535-4713 x205
   Email: [email protected]
   Web: www.flexradio.com





   Tune In Excitement™
   PowerSDR™ is a trademark of FlexRadio Systems






   On Sat, Sep 1, 2012 at 7:24 AM, Lloyd Berg <[email protected]> wrote:

     I just received The Flex Insider - Issue 3...

     For the FLEX-6000 series, will the I2C data from the Accessory Connector
     support automating band selection for external amplifiers and
transverters?

     73

     Lloyd - N9LB


     _______________________________________________
     Flexedge mailing list
     [email protected]
     http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
     This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is
used for posting topics related to SDR software innovation and other
technical SDR topics.


_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software innovation and other technical SDR 
topics.



_______________________________________________
Flexedge mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz
This is the FlexRadio Systems e-mail Reflector called FlexEdge.  It is used for 
posting topics related to SDR software innovation and other technical SDR 
topics.

Reply via email to