Charles, Once you verify the items Eric suggested, feel free to contact me off list. I have MixW 2.16 (no beta) running very well with PowerSDR 1.4.5p7 using VAC, VCOM and the Delta 44 sound card. I'm doing CW (keyboard) and all ASFK modes.
Is this your basic configuration? -Tim --- Tim Ellison ( [EMAIL PROTECTED] ) Integrated Technical Services ( http://www.itsco.com ) -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Charles Greene Sent: Wednesday, December 21, 2005 6:04 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] Beginner Needs Help Hello, I am trying to set up MixW with the SDR-1000. I have MixW v2.16b8 and SDR-1000 v 1.4.5BP7. I have problems in both BPSK31 and CW. First BPSK31. I followed the steps in Bob's paper exactly through figure 12. MixW receives ok. On Transmit. the power level fluctuates between 0 and 20 watts. I have the TX gain set at 2 and the mike gain set at zero, power set at 20 watts. If I increase the mike gain, the power output increases but still fluctuates. When I set the TX gain at 1, it fluctuates between 0 and 17 watts. The fluctuation can be described as 1 sec on and 0.1 sec zero power. Measured with external watt meter. On CW, when I go to TX on Mix, the SDR-1000 goes key down. TNX for your help. 73, Chas W1CG _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
