Smitty, I think you probably have a wrong port selected for WIN-EQF. The virtual ports are like null-modem cables, you hook the SDR1K to one port, the third-party program to the matching other end (port). Take a close look a the vCom Configurator, the ports pairs to use are directly opposite one another on the Configurator, connected by a blue line and a "use" checkbox. If 6 is opposite 7, set the SDR1K CAT control to port 6 and WIN-EQF to port 7.
The TS-2000 emulation is compatible with other Kenwood types but has more commands. You can try selecting different radio types on the CAT setup menu to see which works the best. Do not use the SDR-1000 emulation with anything other than HRD as it contains many special commands and can really slow things down. There are several papers on the FlexRadio web site to help guide you through the setup. 73, Bob, K5KDN -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Myrlen Smith Sent: Sunday, July 16, 2006 8:07 AM To: [email protected] Subject: [Flexradio] WIN-EQF Logging software ----- Original Message ----- From: Myrlen Smith<mailto:[EMAIL PROTECTED]> To: [email protected]<mailto:[email protected]> Sent: Sunday, July 16, 2006 9:00 AM Subject: [Flexradio] (no subject) Is anyone using the SDR with WIN-EQF logging software? I downloaded N8VB vcom driver and it tells me I have ports 6,7,8,9,16,17,18,19. When I go into power SDR setup cat control it gives me the same ports as above. So I setup everything in cat control per the Flex radio manual and setup WIN-EQF to match com6, baud 57,600, parity none, data 8, stop 1. I get a error message "Problem opening port com 6 for rig 1". On Win-EQF's logging window it says Kenwood offline. In WIN-EQF setup the rig selection says Kenwood not TS-2000 is there a difference between the protocol of the TS-2000 and earlier Kenwood radios? Thanks Smitty WB3IAL [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> -------------- next part -------------- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060716/92dc8d40/attachment .html _______________________________________________ FlexRadio mailing list [email protected]<mailto:[email protected]> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz<http:// mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-arch ive.com/[email protected]/> FlexRadio Homepage: http://www.flex-radio.com<http://www.flex-radio.com/> -------------- next part -------------- An HTML attachment was scrubbed... URL: /pipermail/flexradio_flex-radio.biz/attachments/20060716/f8bd577f/attachment .html _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com
