----- Original Message -----
From: Myrlen Smith<mailto:[EMAIL PROTECTED]>
To: Bob Tracy<mailto:[EMAIL PROTECTED]>
Sent: Sunday, July 16, 2006 10:13 AM
Subject: Re: [Flexradio] WIN-EQF Logging software
Hi Bob,
The way you explained it made total sense. My opposite to com 6 is com 16.
Leaving Power SDR set to com 6 I changed Win-EQF com port to 16 and everything
is working great. Thanks a lot.
73
Smitty WB3IAL
----- Original Message -----
From: Bob Tracy<mailto:[EMAIL PROTECTED]>
To: Myrlen Smith<mailto:[EMAIL PROTECTED]> ;
[email protected]<mailto:[email protected]>
Sent: Sunday, July 16, 2006 9:53 AM
Subject: RE: [Flexradio] WIN-EQF Logging software
Smitty,
I think you probably have a wrong port selected for WIN-EQF. The virtual
ports are like null-modem cables, you hook the SDR1K to one port, the
third-party program to the matching other end (port). Take a close look a
the vCom Configurator, the ports pairs to use are directly opposite one
another on the Configurator, connected by a blue line and a "use" checkbox.
If 6 is opposite 7, set the SDR1K CAT control to port 6 and WIN-EQF to port
7.
The TS-2000 emulation is compatible with other Kenwood types but has more
commands. You can try selecting different radio types on the CAT setup menu
to see which works the best. Do not use the SDR-1000 emulation with
anything other than HRD as it contains many special commands and can really
slow things down.
There are several papers on the FlexRadio web site to help guide you through
the setup.
73,
Bob, K5KDN
-----Original Message-----
From: [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]>
[mailto:[EMAIL PROTECTED] Behalf Of Myrlen Smith
Sent: Sunday, July 16, 2006 8:07 AM
To: [email protected]<mailto:[email protected]>
Subject: [Flexradio] WIN-EQF Logging software
----- Original Message -----
From: Myrlen Smith<mailto:[EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]>>
To:
[email protected]<mailto:[email protected]<mailto:[email protected]<mailto:[email protected]>>
Sent: Sunday, July 16, 2006 9:00 AM
Subject: [Flexradio] (no subject)
Is anyone using the SDR with WIN-EQF logging software?
I downloaded N8VB vcom driver and it tells me I have ports
6,7,8,9,16,17,18,19.
When I go into power SDR setup cat control it gives me the same ports as
above.
So I setup everything in cat control per the Flex radio manual and setup
WIN-EQF to match com6, baud 57,600,
parity none, data 8, stop 1. I get a error message "Problem opening port com
6 for rig 1". On Win-EQF's logging window it says Kenwood offline.
In WIN-EQF setup the rig selection says Kenwood not TS-2000 is there a
difference between the protocol of the TS-2000 and earlier Kenwood radios?
Thanks
Smitty WB3IAL
[EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]<mailto:[EMAIL
PROTECTED]<mailto:[EMAIL PROTECTED]>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20060716/92dc8d40/attachment
.html
_______________________________________________
FlexRadio mailing list
[email protected]<mailto:[email protected]<mailto:[email protected]<mailto:[email protected]>>
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz<http://<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz<http://>
mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
Archive Link:
http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-arch<http://www.mail-archive.com/[email protected]/<http://www.mail-arch>
ive.com/[email protected]/<mailto:ive.com/[email protected]/>>
FlexRadio Homepage:
http://www.flex-radio.com<http://www.flex-radio.com/<http://www.flex-radio.com<http://www.flex-radio.com/>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20060716/f8bd577f/attachment
.html
_______________________________________________
FlexRadio mailing list
[email protected]<mailto:[email protected]>
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz<http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz>
Archive Link:
http://www.mail-archive.com/flexradio%40flex-radio.biz/<http://www.mail-archive.com/[email protected]/>
FlexRadio Homepage: http://www.flex-radio.com<http://www.flex-radio.com/>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
/pipermail/flexradio_flex-radio.biz/attachments/20060716/63fcad3c/attachment.html
_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Homepage: http://www.flex-radio.com
