Dave, Have a look at figure 8, TRX board schematic of the SDR1000 hardware description and notice that the phone out from your MP3+ is connected via connector J3 and relay K1 to either the transmitter QSD IC2 or speaker connector J2. During transmit relay K1 connects the phone output of your Mp3+ to the transmitter while the signalpath goes from J3 to J2 during reception. Hope this sheds some light on this matter. vy 73 de SM6OMH Willi
----- Original Message ----- From: "David Ackrill" <[EMAIL PROTECTED]> To: "Willi Reppel" <[EMAIL PROTECTED]> Cc: "Philip M. Lanese" <[EMAIL PROTECTED]>; <flexradio@flex-radio.biz> Sent: Thursday, September 21, 2006 9:26 AM Subject: Re: [Flexradio] Which way round? > > > Willi Reppel wrote: >> Dave >> Make sure that the volume control on your MP3+ is turned to position >> "max" to get output from the transmitter. >> vy 73 de SM6OMH Willi >> >> > I thought that only controlled the headphone socket? > > Dave (G0DJA) > _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com