At 05:22 PM 11/23/2007, Robert McGwier wrote: >I will even do your research for you. Folks, >this took me FIVE SECONDS to find after I sent >my last note. http://com0com.sourceforge.net/ >That is everything you need including serial >ports and tcp<-> serial port code. It may, or >may not be functional. But that is the fun of >it really. It will compile with VS2005 >Express. Someone needs to test VS2008/Free. Bob >-- AMSAT Director and VP Engineering. Member: >ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, >QCWA, FRC. ARRL SDR WG Chair âAn optimist may >see a light where there is none, but why must >the pessimist always run to blow it out?
One thing that it doesn't do (although I'm tinkering on modifying it to do so.. about which I have a question, below) is handle modem control signals (i.e. some hardware devices want to see things like a "break" or toggling RTS or DTR to wake them up... The LDG AT200PC antenna tuner is an example) To that end, I have a question: Is there a "standard" way to tell a IP->serial port widget to assert/deassert/pulse any of the modem control lines or to readback their status? Standard doesn't have to be RFC... if it's some reasonably common industry approach, that's fine (Does the Lantronix widget do this?...I'll have to find the manual and look). Jim, W6RMK _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/

