Jim,
I'm not 100% sure is this is answering your questions. But under the 
SourceForge Null-modem public forum (I followed the SourceForgeProject 
page link) there is a entry "CTS Follow RTS" and alludes to pin-out 
customization added with the following example:

    The pinout customization added to CVS version.
    Example for your case:
    command> change CNCA0 cts=lrts

Maybe this CVS version will help you out.(?)

Dan - kb0ppm

Jim Lux wrote:
> At 05:22 PM 11/23/2007, Robert McGwier wrote:
>   
>> I will even do your research for you.  Folks, 
>> this took me FIVE SECONDS to find after I sent 
>> my last note. http://com0com.sourceforge.net/ 
>> That is everything you need including serial 
>> ports and tcp<-> serial port code. It may, or 
>> may not be functional.  But that is the fun of 
>> it really.  It will compile with VS2005 
>> Express.  Someone needs to test VS2008/Free. Bob 
>> -- AMSAT Director and VP Engineering. Member: 
>> ARRL, AMSAT-DL, TAPR, Packrats, NJQRP, QRP ARCI, 
>> QCWA, FRC. ARRL SDR WG Chair “An optimist may 
>> see a light where there is none, but why must 
>> the pessimist always run to blow it out?
>>     
>
>
> One thing that it doesn't do (although I'm 
> tinkering on modifying it to do so.. about which 
> I have a question, below) is handle modem control 
> signals (i.e. some hardware devices want to see 
> things like a "break" or toggling RTS or DTR to 
> wake them up... The LDG AT200PC antenna tuner is an example)
>
> To that end, I have a question:
>
> Is there a "standard" way to tell a IP->serial 
> port widget to assert/deassert/pulse any of the 
> modem control lines or to readback their 
> status?  Standard doesn't have to be RFC... if 
> it's some reasonably common industry approach, 
> that's fine (Does the Lantronix widget do 
> this?...I'll have to find the manual and look).
>
>
> Jim, W6RMK
>
>
>
>
>
> _______________________________________________
> FlexRadio mailing list
> [email protected]
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
> FlexRadio Knowledge Base: http://kb.flex-radio.com/
> FlexRadio Homepage: http://www.flex-radio.com/
>
>
>   

_______________________________________________
FlexRadio mailing list
[email protected]
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/
FlexRadio Knowledge Base: http://kb.flex-radio.com/
FlexRadio Homepage: http://www.flex-radio.com/

Reply via email to