The problem is that when running the demo, there has to be a hardware component that performs the A/D and D/A conversions and this is your PC sound card. Vista and to a lesser degree Win7 have made it difficult to use generic sound cards for this purpose.
You can get it you work with a lot of "fiddling" with soundcard setting. The FLEX-x000 SDRs have their own internal A/D and D/A converters so this issue is moot when you have radio hardware attached to the PC running PowerSDR. PowerSDR v2.0 will be 100% compatible with Win7 x64, so it will not have the problems listed below because it does not use .NET 1.1 -Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of budirving Sent: Wednesday, December 16, 2009 7:23 AM To: [email protected] Subject: [Flexradio] Test Drive/Demo PowerSDR Is there a solution for this? I see the notice that there is a known compatibility issue with the latest update to Vista. I am trying to run the test drive version of PowerSDR with Windows 7, 64 bit on an HP desktop, quad processor, 6GB. PowerSDR requires Microsoft NET Framework 1.1.4322 which in turn will not install - it has compatibility issues with Windows 7. I have just ordered my Flex 5000 and would like to work out the PowerSDR installation before the radio arrives. 73, AB1KK _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to [email protected] _______________________________________________ FlexRadio Systems Mailing List [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/ Message delivered to [email protected]
