[EMAIL PROTECTED] wrote: > > That's a good p oint, as much as I hate to admit it. That brings up a point, > Christian, could you try compiling the latest JSBSim and let me know what you > find?
I found the problem with the timezone. Can it be that zone.tab isn't checken in as binary? FGFS stumbles over the line endings there. fixed that I figured out that JSBsim still blows up :( Panel visible = 1 Finally initializing fdm Starting and initializing JSBsim Start common FDM init ...initializing position... FGJSBsim::set_Longitude: -2.13554 FGJSBsim::set_Latitude: 0.65648 cur alt (ft) = 5000 FGJSBsim::set_Altitude: 5000 lat (deg) = 37.6135 ...initializing ground elevation to 0.367029ft... common_init(): set ground elevation 0.367029 FGJSBsim::set_Runway_altitude: 0.367029 ...initializing sea-level radius... lat = 37.6135 alt = 5000 FGJSBsim::set_Sea_level_radius: 2.08997e+007 ...initializing velocities... FGJSBsim::set_V_calibrated_kts: 0 ...initializing Euler angles... FGJSBsim::set_Euler_Angles: 0, 0.0074002, 5.19934 End common FDM init fgGeodToGeoc(): Domain error sqrt(1.#QNAN) Initialized JSBSim with: Indicated Airspeed: 0 knots Bank Angle: -1.#IND deg Pitch Angle: 1.#QNAN deg True Heading: -1.#IND deg Latitude: 1.#QNAN deg Longitude: 1.#QNAN deg Altitude: -1.#IND feet loaded initial conditions set dt Finished initializing JSBSim FGControls::get_gear_down()= 1 FGJSBsim::set_Euler_Angles: 0, 1.#QNAN, -1.#IND FGJSBsim::set_Euler_Angles: -1.#IND, 0.0074002, -1.#IND FGJSBsim::set_Euler_Angles: -1.#IND, 1.#QNAN, 5.19934 CU, Christian -- The idea is to die young as late as possible. -- Ashley Montague Whoever that is/was; (c) by Douglas Adams would have been better... _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
