John Check <[EMAIL PROTECTED]> said: > That sounds about right. ALternate layouts I have seen have > gauges on that panel too. Sometimes one column on each side > of radios, some times two on one side, or whatever. > >
Yes it looks like that series is always three panels....left, center, and right. Best I can tell comparing three different pictures is that the panel is actually forty four inches wide. It's 15" high (the flat part not the whole panel) and the left and right sides are 15" wide. The center is 14" wide. Probably all three are 15" but the center is overlapped by half an inch on each side. The fuselage taper must account for the published cockpit width of 48.5". Best, Jim _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
