> Monday evening I updated SimGear, the source, and data from cvs. The > dc3.xml file in Aicraft-yasim was changed for the worse (IMHO).David,
I'll be happy to put it back to what it was, but it might be better if you could spend a little time fiddling with the XML file so that the plane handles more correctly. I don't spend enough time with the plane any more to get a good feel for its flying, and I'll be happy to check in any reasonable changes.
Here is a dc3.xml file that allows acceleration on the mains, reasonable wheel landings or touch-n-goes but will still ground loop without careful rudder use. I also did power-on and power-off stalls and the rudder picks up the wing that drops and when the elevator is released, the stall recovery is quick. Try it out. If it seem reasonable, check it into cvs
By the way, do you know if the wing twist is to address wash out? If so, who should I give feedback to as I think the twist does not wash out both wings.
Thanks,
Dave Perry
_______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel
