On Wed, 15 Dec 2004 10:01:49 -0600, Jon wrote in message <[EMAIL PROTECTED]>:
> On Wed, 15 Dec 2004 09:10:03 -0500 > David Megginson <[EMAIL PROTECTED]> wrote: > > A Piper owner trying to have is PA-28-201 (Arrow) repaired managed > > to get this concrete information from Piper: > > > Dear Sir: > > > > There is not an off-set of the vertical fin or the stabilator on the > > PA28R-201. The fin is should be vertical to center line and the > > stablilator should be horizontal to the ground when the aircraft is > > straight and level. The only off-set would be the wing twist and the > > engine is off set by approximately 3 degrees to the right of center > > and approximately 4 degrees down. > > Excellent stuff. This is quite easy to adjust in JSBSim. ..also fits excellently into areomodelling practice. ;-) -- ..med vennlig hilsen = with Kind Regards from Arnt... ;-) ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. _______________________________________________ Flightgear-devel mailing list [EMAIL PROTECTED] http://mail.flightgear.org/mailman/listinfo/flightgear-devel 2f585eeea02e2c79d7b1d8c4963bae2d