> OK, got it working. On another note, are interpolation tables supposed
> to work everywhere factor tags do? They don't for spin animations, which
> would be handy for me right now.
You can use TABLES in FACTOR definitions, as with ground effect mods to the lift
coefficient in this example from the C172x:
<GROUP NAME="CLb">
Basic_lift
<FACTOR NAME="kCLge" TYPE="VECTOR">
Change_in_lift_due_to_ground_effect
13
aero/h_b-mac-ft
none
0.0 1.203
0.1 1.127
0.15 1.090
0.2 1.073
0.3 1.046
0.4 1.055
0.5 1.019
0.6 1.013
0.7 1.008
0.8 1.006
0.9 1.003
1.0 1.002
1.1 1.0
</FACTOR>
<COEFFICIENT NAME="CLwbh" TYPE="TABLE">
Lift_due_to_alpha
17
2
aero/alpha-rad
aero/stall-hyst-norm
aero/qbar-psf | metrics/Sw-sqft
0 1
-0.09 -0.22 -0.22
0 0.25 0.25
0.09 0.73 0.73
0.1 0.83 0.78
0.12 0.92 0.79
0.14 1.02 0.81
0.16 1.08 0.82
0.17 1.13 0.83
0.19 1.19 0.85
0.21 1.25 0.86
0.24 1.35 0.88
0.26 1.44 0.9
0.28 1.47 0.92
0.3 1.43 0.95
0.32 1.38 0.99
0.34 1.3 1.05
0.36 1.15 1.15
</COEFFICIENT>
...
</GROUP>
The VECTOR in the FACTOR definition above is just a type of a table.
Is this what you were referring to?
Jon
_______________________________________________
Flightgear-devel mailing list
[email protected]
http://mail.flightgear.org/mailman/listinfo/flightgear-devel
2f585eeea02e2c79d7b1d8c4963bae2d
