Curtis L. Olson wrote:
John Wojnaroski wrote:
There will be some slight hesitations when new tiles are loaded. It's
possible that a large dt could cause you to overshoot your target. If
you factor dt into your control algorithm (if it's not already) that
might help? I'd take a close look and see if dt spikes at the same
time as your anomolies.
Okay, here is the point of the discontinuity. This is data on the FG
side that is being sent to the sim
code snippets............
setting up the property pointers
<<<<<<<<<<<<<<<
p_altitude_agl(fgGetNode("/position/altitude-agl-ft", true)),
vel_kcas(fgGetNode("/velocities/airspeed-kt[0]", true)),
>>>>>>>>>>>
and then packing the data into the UDP packet and a temp file to save it
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
data->v_kcas = vel_kcas->getDoubleValue();
// speed_buf[s++] = vel_kcas->getDoubleValue();
fprintf( speed, "%5d %f\n", s++, vel_kcas->getDoubleValue() );
cout << s << " " << data->v_kcas << endl;
if ( s > 10000 ) {
s = 0;
fclose( speed );
speed = fopen( "velocity" , "w" );
}
>>>>>>>>>>>>>>>>>>>>>>>.
and the point of the speed change (first number is just a frame counter
for reference)
2874 249.876
2875 249.877
2876 249.876
2877 249.876
2878 249.877
2879 249.876
Altitude = 60
Temp at alt (C) = 17
Temp sea level (C) = 17.118
Altitude = 60
Dewpoint at alt (C) = 7
Dewpoint at sea level (C) = 7.012
2880 262.848
2881 262.848
2882 262.845
2883 262.841
2884 262.837
2885 262.833
2886 262.825
2887 262.822
Again, this is happening in FG. The intervening data is from the
terminal at the point of the speed change and I assume this has
something to do regards the tile data.
Any ideas, suggestions as to what is happening to cause the speed
change. Might it be related to altitude, except the baro altitude is
not changing. My hunch it is somehow related to fetching real world
weather and atmospheric weather data not propagating to the new tile.
With weather fetching turned off the problem goes away in that the baro
setting is set to standard 29.92/1013 while with real weather the baro
setting was 30.01
Regards
John W.
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
Flightgear-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
