On Thu, 08 Jun 2006 10:12:50 -0500, Curtis wrote in message <[EMAIL PROTECTED]>:
> Frederic Bouvier wrote: > > libplibul.* is not found. By the way, --with-plib is not a valid > > terragear configure option. Try this instead : > > > > $ CXXFLAGS=-I/opt/include LDFLAGS=-L/opt/lib ./configure <your other > > option flags> ..ok. How do I point TerraGear ./configure (and make) to plib? (Plib is in /opt): http://80.239.32.252/terragear.configure.fails and http://80.239.32.252/TerrorGear.config.log > Or possibly a bit simpler, try: > > $ ./configure --prefix=/opt ..see http://80.239.32.252/terrorgear.configure.fails and http://80.239.32.252/TerraGear.config.log > If you use a consistent prefix for plib, simgear, openal, flightgear, > and terragear, they should all be happy. > I've built the whole chain of tools in nonstandard locations this > way. ..aye. I have openal, freealut, gts and newmat in /usr/lib as debs, and point to them --with-gts=/usr/lib etc. > For what it's worth, --prefix=/opt implicitely adds /opt/include to > the include path and /opt/lib to the library path. ..ok, but still ignores or fails to see plib there. ..thanks to Fred 'n Curt. -- ..med vennlig hilsen = with Kind Regards from Arnt... ;o) ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
