For those interested in my F4E project, I spent the last week doing some
upgrades to the cockpit.
- It now uses the OSG pick animation to control the Altimeter, Radio
Altimeter, Clock, Instrument Lighting and GMeter.
-- Altimeter
Left click on the mode button to toggle from Reset to Stby modes.
In Reset the altimeter runs from the flight computer and is very
accurate. In Stby it is a standard pressure altimeter, use the
left and middle buttons or mouse wheel to adjust the altimeter
settings.
-- Radio Altimeter
Use the left and middle buttons to adjust the marker bug and
control the altitude where the red (was yellow) warning light
illuminates
-- Clock
Left click the small button on the top to start the stop watch,
left click again to stop it, a third left click resets it to zero.
-- Instrument Lighting
Use the left and middle buttons or mouse wheel to adjust instrument
panel lighting.
-- GMeter
Left click the button on the lower right of the G-Meter to reset
the tell-tales.
NOTE: If you're not running the latest CVS FlightGear you will not be
able to click these instruments in the cockpit anymore.
- There are working gauges for pitch trim and nozzle position as well as
gear, flap and slat indicators.
As always it is at http://www.jentronics.com/fgfs/F4E.tgz
Thanks,
Ron
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Flightgear-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
