On jeu 6 décembre 2007, Heiko Schulz wrote: > > Hi > > A screenshot here: > http://www.hoerbird.net/boeing737-300.3dcockpit1.jpg > > I have still trouble with perfomance, but I have a > too old pc anyway ... > > That's why the developement is very slow and now cause > of looking for a new job I will not really have the > time to go one. So I will try this weekend to fix some > things and maybe let commit it. I also changed the > exterior model - it has now the real dimensions of a > 737-300. > I also changed the offset-position of the aircraft- it > matches now to the contact points. ( no floating above > ground!) > > I also improved the AP with adding the Vertical Speed > Hold. > > The Overhead Panel has to be fixed and finished, the > VOR-instrument has to be done and still a lot of other > things. > > But the fdm of the 737 done here by Dave Culp is one > of the best we have, I was really surprised that it > can be flew exactly after the checklists and > procedures which can be found on several sites in the > web! > > Thanks > David! > > Hopefully I can do it this week... > Regards > HHS > >
Wouahhhh, Who said that 737 was dead :) Thanks Heiko Cheers -- Gérard http://pagesperso-orange.fr/GRTux/ << Less i work, better i go >> ------------------------------------------------------------------------- SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
