Tim Moore wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > dave perry wrote: > | Tim Moore wrote: > |> -----BEGIN PGP SIGNED MESSAGE----- > |> Hash: SHA1 > |> > |> I've checked in a fix that addresses the non 4:3 problem and also fixes > the osgviewer > |> distortion issue. It turned out to be pretty hairy. Please give the patch > a try. > |> > |> > | > | Thanks Tim, > | > | With today's SimGear and source cvs, I compiled with --enable-osgviewer > | and the distortions with resizing are gone. Another issue I had > | documented remains. If I don't resize, the hot spot > | vertical-coordinates are too low. Once I resize or maximize the screen, > | the hot spots are correct. It appears the mouse vertical is initially > | off until you resize. > I did check this and it seemed to work for me, but I'm probably used to > hunting around > for the hotspots when I click on stuff. Can you give me a precise example > that doesn't > work? Also, what's the magic for displaying the hot spots? > When I start fgfs in the pa24 with the Century IIb, and try and switch the autopilot on (lower left on the panel), clicking from the lower 1/3 of this switch to about 2/3 of the height of the switch below the switch is hot. In other words, the active hot spot is about 2/3 of the height of this switch too low. To display the hot spots, type ctrl-C. All the hot spots are the same distance too low.
If you maximize the window, or just resize the window, the active area of the hot spot will be moved up to the right location. Hope this was clear. - Dave Perry ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
