> *Master machine:* > *Slave machine:* > The most annoying problem with this setup is: > On "high" speed on ground (i.e. before take off) OR on low altitude 200-600 > feet (before landing) the slave machine totally freezes. > Tested on few models: C172, PC7, A-10. > In some cases on higher altitude the displaying on slave machine revives. > Exit from FG on master machine during the flight, when slave is connected > and stuck, causes to slave to show "last picture".
which protocol do you use to synchronize slave and master? what flightgear version? the --native protocol is broken, the --native-controls was broken some time ago Torsten ------------------------------------------------------------------------- This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/javaone _______________________________________________ Flightgear-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/flightgear-devel
